Coplanar Waveguide Microwave Sensor for Label-Free Real-Time Glucose Detection

Loading...
Thumbnail Image
Date
2019-06
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Společnost pro radioelektronické inženýrství
Altmetrics
Abstract
In this work, a~real-time label-free microwave diagnostic approach using Co-Planar Waveguide (CPW) design has been demonstrated for glucose detection. This mechanism has tremendous potential for the biomedical applications. Here, glucose biosensor is implemented with 50 Ω CPW transmission line, where the centre localized 3 mm diameter of CPW transmission line has been used for the sensing. Glucose sensor is implemented utilizing low cost multilayer PCB and polymer Poly-Di-Methyl-Siloxane(PDMS) fabrication technology. CPW transmission line is fabricated on FR4 microwave laminate board. To confine the Analyte Under Test (AUT) on the sensing area, PDMS polymer cavity is configured in the centre of CPW transmission line. The electromagnetic interaction with the varying dielectric constant of Glucose:DI water solution results shift in S11 parameter, which is closely observed to use as the source of sensing. CPW based glucose sensor is experimentally measured for S11 parameter using VNA, with varying glucose concentration range from 0 mg/ml (only DI water) to 4 mg/ml with the interval of 1 mg/ml. The measured results showed good sensitivity of 108.4 MHz/mg/ml and high accuracy with good linear regression coefficient of 0.9979.
Description
Citation
Radioengineering. 2019 vol. 28, č. 2, s. 491-495. ISSN 1210-2512
https://www.radioeng.cz/fulltexts/2019/19_02_0491_0495.pdf
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution 4.0 International license
http://creativecommons.org/licenses/by/4.0/
Collections
Citace PRO