2012/1

Browse

Recent Submissions

Now showing 1 - 5 of 71
  • Thumbnail Image
    Item
    Design of Compact Planar Diplexer Based on Novel Spiral-Based Resonators
    (Společnost pro radioelektronické inženýrství, 2012-04) Lu, Ke; Wang, Guang-Ming; Xu, Hai-yang; Yin, Xiong
    A miniaturized planar diplexer utilizing the novel spiral-based resonators is proposed. The given cell which is initially proposed in this article is composed of two separated rectangular spirals which are asymmetrical to each other and thus, it is called as ‘asymmetrical separated spirals resonator’ (ASSR). ASSR has more superior transmission property than the previous prototype and extremely compact dimension is also achieved. It is demonstrated that ASSR can exhibit bandpass performance with high frequency selectivity and good transmission property within the relatively low frequency band. Based on the given characteristic, one planar diplexer composed of T-junction and two ASSRs is synthesized and the fabricated prototype with compact dimension is achieved, thanks to ASSRs explored. Simultaneously, the transversal dimension of each channel is extremely compact because ASSRs are completely embedded in the feed lines. Both the simulated and measured results indicate that satisfactory impedance matching and high isolation between two channels are achieved. Furthermore, the proposed diplexer is uniplanar and no defected ground structure is introduced.
  • Thumbnail Image
    Item
    Time-of-Flight Based Calibration of an Ultrasonic Computed Tomography System
    (Společnost pro radioelektronické inženýrství, 2012-04) Filipik, Adam; Jan, Jiri; Peterlik, Igor
    The paper presents a novel method for calibration of measuring geometry and of individual signal delays of transducers in ultrasonic computed tomography (USCT) systems via computational processing of multiple time-of-flight measurements of ultrasonic (US) impulses. The positions and time-delay parameters of thousands of ultrasonic transducers inside the USCT tank are calibrated by this approach with a high precision required for the tomographic reconstruction; such accuracy cannot be provided by any other known method. Although utilising similar basic principles as the global positioning system (GPS), the method is importantly generalised in treating all transducer parameters as the to-be calibrated (floating) unknowns, without any a-priori known positions and delays. The calibration is formulated as a non-linear least-squares problem, minimizing the differences between the calculated and measured time-of-arrivals of ultrasonic pulses. The paper provides detailed derivation of the method, and compares two implemented approaches (earlier calibration of individual transducers with the new approach calibrating rigid transducer arrays) via detailed simulations, aimed at testing the convergence properties and noise robustness of both approaches. Calibration using real US signals is described and, as an illustration of the utility of the presented method, a comparison is shown of two image reconstructions using the tomographic US data from a concrete experimental USCT system measuring a 3D phantom, without and after the calibration.
  • Thumbnail Image
    Item
    Novel Compact and High Selectivity Dual-band BPF with Wide Stopband
    (Společnost pro radioelektronické inženýrství, 2012-04) Wang, Lei; Guan, Bo-Ran
    A novel type of compact and high selectivity dual-band bandpass filter (BPF) incorporating a dual-mode defected ground structure resonator (DDGSR) and a dual-mode open-stub loaded stepped impedance resonator (DOLSIR) is proposed in this paper. Utilizing capacitive source-load coupling and the intrinsic characteristics of the two types of dual-mode resonators, compact dual-band BPF with multi transmission zeros near the passband edges as well as a wide stopband which can be used to achieve high selectivity is realized. An experimental dual-band BPF located at 2.4 and 3.2 GHz was designed and fabricated. The validity of the design approach is verified by good agreement between simulated and measurement results.
  • Thumbnail Image
    Item
    Comments and Remarks over Classic Linear Loop-Gain Method for Oscillator Design and Analysis. New Proposed Method Based on NDF/RRT
    (Společnost pro radioelektronické inženýrství, 2012-04) Luis Jimenez-Martin, Jose; Gonzalez-Posadas, Vicente; Parra-Cerrada, Angel; Enrique Garcia-Munoz, Luis; Segovia-Vargas, Daniel
    Present paper describes a new method for designing oscillators based on the Normalized Determinant Function (NDF) and Return Relations (RRT ). First a review of the loop-gain method will be performed, showing pros, cons and including some examples for exploring wrong so- lutions provided by this method. Wrong solutions, because some conditions have to be previously fulfilled in order to obtain right ones, which will be described and finally, demonstrate that NDF analysis is necessary, including Return Relations (RRT ) usefulness, which in fact are related with the True Loop-Gain. Finally concluding this paper, steps for oscillator design and analysis, using the proposed NDF/RRT method will be presented, compared to wrong previous solutions pointing out new accuracy achieved on oscillation frequency and QL prediction. Also, more new examples, of plane reference oscillators (Z/Y/rho), will be added for which loop gain method application is clearly difficult or even impossible, solving them with the new proposed NDF/RRT method.
  • Thumbnail Image
    Item
    Implementation and Investigation of a Compact Circular Wide Slot UWB Antenna with Dual Notched Band Characteristics using Stepped Impedance Resonators
    (Společnost pro radioelektronické inženýrství, 2012-04) Li, Yingsong; Li, Wenxing; Jiang, Tao
    A coplanar waveguide (CPW) fed ultra-wideband (UWB) antenna with dual notched band characteristics is presented in this paper. The circular wide slot and circular radiation patch are utilized to broaden the impedance bandwidth of the UWB antenna. The dual notched band functions are achieved by employing two stepped impedance resonators (SIRs) which etched on the circular radiation patch and CPW excitation line, respectively. The two notched bands can be controlled by adjusting the dimensions of the two stepped impedance resonators which give tunable notched band functions. The proposed dual notched band UWB antenna has been designed in details and optimized by means of HFSS. Experimental and numerical results show that the proposed antenna with compact size of 32 × 24 mm2, has an impedance bandwidth range from 2.8 GHz to 13.5 Hz for voltage standing-wave ratio (VSWR) less than 2, except the notch bands 5.0 GHz - 6.2 GHz for HIPERLAN/2 and IEEE 802.11a (5.1 GHz - 5.9 GHz) and 8.0 GHz - 9.3 GHz for satellite and military applications.