Polyfunkční dům Lignum
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Predmetom diplomovej práce je polyfunkčný dom obdĺžnikového pôdorysu v meste Žilina. Objekt je štvorpodlažný a nepodpivničený. Funkčne je rozdelený na dve časti. Prvá časť je priestorom pre tri prevádzky v severovýchodnej časti 1NP, ku ktorým prilieha parkovisko určené pre tieto prevádzky. Tieto prevádzky nie sú projektom bližšie špecifikované a ráta sa so zmenami projektu na základe jednotlivých požiadaviek investorov. Druhou funkčnou časťou je priestor na bývanie v bytoch. Hlavný vchod je orientovaný na juhozápad a vedľajší na severovýchod v blízkosti vchodov do prevádzok. V 1NP sa nachádza bytové príslušenstvo ako kočikáreň a skladové priestory. Do obytných častí vedú dva vchody. Byty sa nachádzajú v 2NP až 4NP a ich dispozičné riešenie je 1+KK, 2+KK, 3+KK a 4+KK. Bytom náležia parkovacie miesta oddelené od parkovacích priestorov prevádzok. Nosným systémom objektu je stenový systém z keramických tvaroviek POROTHERM 30 AKU P+D, ktoré je použité aj ako obvodové murivo a aj ako vnútorné nosné medzibytové steny. Nosné vnútorné steny v jednotlivých bytoch sú z POROTHERM 25 AKU P+D a doplnené o nenosné steny POROTHERM 14 PROFI P+D. Steny sú založené na betónových a železobetónových pásoch. Obvodový plášť je zateplený kontaktným zatepľovacím systémom z EPS gray hrúbky 200mm. Vodorovné nosné konštrukcie sú zo železobetónu. Objekt je zastrešený plochou strechou so sklonom min 3%. Hydroizolácia je z PVC-P fólie. Ako tepelná izolácia slúži minerálna vata hrúbky 400mm.
The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.
The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.
Description
Citation
JAKUBČÁNIN, M. Polyfunkční dům Lignum [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2015.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Pozemní stavby
Comittee
Date of acceptance
2015-02-02
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení