Nondestructive Testing of Advanced Concrete Structure during Lifetime

Loading...
Thumbnail Image
Date
2015-07-08
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Hindawi Publishing Corporation
Altmetrics
Abstract
The paper reports on measurements and analysis of the measurements during hardening and drying of specimens using selected acoustic nondestructive testing techniques. An integrated approach was created for better understanding of the relations between the lifetime cycle and the development of the mechanical properties of concrete. Acoustic emission, impact echo, and ultrasonic techniques were applied simultaneously to the same mixtures. These techniques and results are presented on alkali-activated slag mortars. The acoustic emission method detects transient elastic waves within the material, caused by the release of cumulated stress energy, which can be mechanical, thermal, or chemical. Hence, the cause is a phenomenon which releases elastic energy into the material, which then spreads in the form of an elastic wave. The impact echo method is based on physical laws of elastic stress wave propagation in solids generated by mechanical impulse. Ultrasonic testing is commonly used to find flaws in materials or to assess wave velocity spreading.
Příspěvek zprávy o měření a analýzu měření při kalení a sušení vzorků za použití vybraného akustické nedestruktivní testování technik. Integrovaný přístup byl vytvořen pro lepší pochopení vztahů mezi životního cyklu a vývoj mechanických vlastností betonu. Akustická emise, vliv echo, a ultrazvukové techniky byly aplikovány současně na stejné směsi. Těmito postupy a výsledky jsou uvedeny na alkalicky aktivovaných strusky malty. Metoda akustické emise detekuje přechodné elastické vlny v materiálu, způsobené uvolněním kumulovaného stresu energie, která může být mechanické, tepelné nebo chemické. Z toho důvodu, je příčinou je jev, který uvolňuje elastickou energii do materiálu, který pak se šíří ve formě elastické vlny. Echo metoda dopadů je založena na fyzikálních zákonech šíření elastické napěťových vln v pevných látkách generované mechanickým impulsem. Zkoušení ultrazvukem se běžně používá k nalezení chyby v materiálech, nebo k posouzení rychlosti vlny šíří.
Description
Citation
Advances in Materials Science and Engineering. 2015, vol. 2015, issue 7, p. 1-5.
http://dx.doi.org/10.1155/2015/286469
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution 3.0 Unported
http://creativecommons.org/licenses/by/3.0/
Citace PRO