• Alandering Of Li-Ion Electrodes And Its Im-Pact On The Final Capacity Of Lithium-Ion Cell 

    Svoboda, Lukáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    There is an effort to produce lithium-ion batteries with maximal density of energy, or higher capacity of cell with the same size. Calendaring of electrodes is important part of manufacturing of batteries. Its parameters, ...
  • Telemetry System For Rc Airplane With Navigation 

    Orolin, Jakub (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This project is focused on design of telemetric system for radio controlled aircraft. The output of the system will be relevant flight data such as velocity, altitude, direction of flight, rotation or geographical position ...
  • Comparsion Of VP9 And H265 Encoding Standards 

    Fendrich, Vítězslav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This paper deals with a comparison of the latest VP9 and H.265 video compression standards by objective and subjective metrics. For this purpose, four short video sequences in Ultra High Definition (UHD) resolution and ...
  • Test Equipment For Set-Up Animation Light Function 

    Holinka, David (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This work deals with creating equipment for testing animation ligth function. This device would allow display animation in any color and disposition. The equipment will consist of hardware and software. Hardware will ...
  • Study Of Effect Of Organic Additives On The Morfology Of Zinc Deposit 

    Smejkal, Jan (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    Article studies effect of the selected organic additives on zinc deposit properties in relation to negative electrode for Ni-Zn battery. All additives were examined with emphasis on the study of dendritic and mossy structure ...
  • Model Of Bipedal Walking Robot 

    Čermák, Jan (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The purpose of this thesis is to construct a two-legged walking robot. This robot will be able to walk forward independently, following a given trajectory without any human assistence. The whole thesis includes the design ...
  • Li-Ion Accumulators – Comparison Of Cathode Materials 

    Lexová, Kristýna (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The issue of energy storage becomes increasingly important with the growing need for safe and clean energy that could be used in portable electronics and electric vehicles. This paper shortly introduces the topic of ...
  • The Impact Of Critical Flow In Differentially Pumped Chamber 

    Hlavatá, Pavla (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    Environmentální rastrovací elektronový mikroskop (EREM), který je konstruován pro vysoký tlak plynů v komoře vzorku namísto vakua, umožňuje studovat vzorky obsahující vodu nebo živé biologické vzorky bez nutnosti jejich ...
  • Simulation And Fabrication Of Piezoelectric Mems Resonators 

    Klempa, Jaroslav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This paper presents FEM analyses and fabrication of piezoelectric MEMS resonators. Modal and harmonic analyses were made using Ansys® Workbench. These simulations showed the influence of resonators geometry on their ...
  • Smart Home System With The 'Raspberry Pi' 

    Lokajíček, Lukáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This article deals with the design of the Smart Home System (SHS), which takes advantages of the 'Raspberry Pi' single-board computer. The concept is focused on reliability, extensibility and low acquisition price. Background ...
  • Roughness Measurement With Laser Profilometry 

    Mach, Radoslav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The project deals with technology of laser profilometry for material roughness measurements purposes. The focus of this work is measuring roughness parameters of materials, such as metal with using of different types of ...
  • BLDC Motor Hil Real-Time Simulation On ZYNQ 

    Bartík, Ondřej (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This paper is focused on real-time simulation of BLDC motor on SOC ZYNQ device. The simplified model of BLDC motor in Matlab/Simulink is introduced. Next, the scale method based on physical principles of motor is described. ...
  • Filesystem Consistency Check For Universal Disk Format 

    Vladyka, Vojtěch (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This paper focus on creation of tool for detection and correction UDF filesystem in OS Linux. It describes all available error detection mechanisms described by ECMA-167 standard and possible solution how to correct found errors.
  • Design And Realisation Of The Wireless Communication Network 

    Ptáček, Zdeněk (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This work deals with usage of wireless communication circuit nRF24L01 + for the realization of a dedicated wireless network using tree topology. Each wireless unit controls its own base frequency band. The wireless network ...
  • Design Of DA Converter With Fully Differential Output In CMOS Technology 

    Mácha, Petr (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This work deals with the design of eight-bit digital to analog converter in technology I3T25 of ON Semiconductor company. The main goal is to design a converter with small size, and high transfer speed. The functionality ...
  • Internal Voltage Regulator For Automotive 

    Bryndza, Ivan (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This work contains suitable topology and circuit design of a linear voltage regulator with respect to suppression of disturbances coming from supplied circuit into the input of the regulator. The converter is designed for ...
  • Thermal Conductivity Measurements 

    Krejčí, Jakub (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This thesis deals with non-stationary thermal conductivity measurement using point heat source. There are compared various measurements of thermal conductivity and designed own correction for pulse duration. The practical ...
  • Ultrasonic Oil Level Senzo 

    Chutný, Pavel (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    In this paper, different kinds of level sensor are described. The way of measurement of engine oil is clarified. The principle of ultrasonic senzor is explained, because own oil level senzor is based on ultrasonic wave. ...
  • Cell Detection Methods For The Images From Holographic Microscope 

    Vičar, Tomáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    Microscopical cell image analysis is widely used for cell behavior and morphology study. In dense cell cultures precise detection (separation) of a single cell is challenging task and it is important step for automatic ...
  • Signal Based Processing Of Metagenomic Data From Nanopore Sequencing 

    Kupková, Kristýna (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The revolutionary sequencing technology introduced by Oxford Nanopore Technologies – MinION holds a great promise in the field of metagenomics due to its low cost, produced long reads and small size, which makes it available ...