Modified compact tension specimen for experiments on cement based materials: comparison of calibration curves from 2D and 3D numerical solutions

Loading...
Thumbnail Image
Date
2017-01-01
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Gruppo Italiano Frattura
Altmetrics
Abstract
The evaluation of fracture mechanics parameters of materials has become very important part of considering the condition of older constructions as well as properties of newly developed materials. This contribution focuses on a numerical simulation and a calculation of fracture mechanical properties of modified compact tension test configuration. It is possible to prepare the specimens used for this test very easily from a drilled core or from specimens used for cylindrical compression test. The focus of contribution is to compare selected outputs from numerical solution of 2D (plane strain conditions) with 3D models. Particularly, the determination of the influence of 2D and 3D model on the calibration curves for selected fracture mechanics parameters is of interest. Finite element software ANSYS was used for the numerical analysis.
Description
Citation
Frattura ed Integrita Strutturale. 2017, vol. 11, issue 39, p. 118-128.
http://www.gruppofrattura.it/pdf/rivista/numero39/numero_39_art_13.pdf
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution 4.0 International
http://creativecommons.org/licenses/by/4.0/
Citace PRO