Show simple item record

dc.contributor.authorŠimonová, Hanacs
dc.contributor.authorKucharczyková, Barbaracs
dc.contributor.authorBílek, Vlastimilcs
dc.contributor.authorKocáb, Daliborcs
dc.date.accessioned2020-07-31T06:58:49Z
dc.date.available2020-07-31T06:58:49Z
dc.date.issued2020-03-05cs
dc.identifier.citationMATEC Web of Conferences. 2020, vol. 310, p. 1-9.en
dc.identifier.issn2261-236Xcs
dc.identifier.other162766cs
dc.identifier.urihttp://hdl.handle.net/11012/193481
dc.description.abstractThis paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurementsen
dc.formattextcs
dc.format.extent1-9cs
dc.format.mimetypeapplication/pdfcs
dc.language.isoencs
dc.publisherEDP Sciencescs
dc.relation.ispartofMATEC Web of Conferencescs
dc.relation.urihttps://www.matec-conferences.org/articles/matecconf/abs/2020/06/matecconf_space20_00021/matecconf_space20_00021.htmlcs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectslagen
dc.subjectalkali-activationen
dc.subjectmortaren
dc.subjectfractureen
dc.titleMechanical fracture characterization of alkali-activated slag mortars with standardized and natural sanden
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavební mechanikycs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavebního zkušebnictvícs
thesis.grantorVysoké učení technické v Brně. Fakulta chemická. Ústav chemie materiálůcs
sync.item.dbidVAV-162766en
sync.item.dbtypeVAVen
sync.item.insts2021.05.10 12:55:23en
sync.item.modts2021.05.10 12:14:55en
dc.coverage.volume310cs
dc.identifier.doi10.1051/matecconf/202031000021cs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2261-236X/cs
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International