Publikační činnost pracovníků VUT v Brně
Browse by
Sub-communities within this community
-
Fakulta architektury [14]
-
Fakulta chemická [211]
-
Fakulta podnikatelská [124]
-
Fakulta stavební [586]
-
Rektorát [2]
Recent Submissions
-
The Comparison of 3D and 2D Measurement Techniques Used for the Analysis of Vehicle Deformation
(SciTePress, 2020-05-04)As one of the main assumptions for the accident analysis has been detailed information about vehicle deformation. The precise deformation depth allows to quantify deformation energy and related impact speed. The aim of ... -
Analysis of selected off-road glances during driving in real road traffic
(Elsevier, 2020-03-20)The aim of this ongoing research has been the analysis of driver visual behavior in real road traffic. The paper deals with analysis of duration of selected off-road glances. The total gaze duration depending on mirror ... -
Internal two-phase flow and spray characteristics of outside-in-liquid twin-fluid atomizers
(Elsevier Ltd., 2021-01-09)Despite its wide industrial applications, the internal-mixing twin-fluid atomization suffers a major problem of spray unsteadiness. This work links the flow characteristics inside a newly designed outside-in-liquid (OIL) ... -
The Effect of Geometrical, Operational, Mixing Methods, and Rheological Parameters on Discharge Coefficients of Internal-Mixing Twin-Fluid Atomizers
(MDPI, 2020-05-11)Accurate prediction of the discharge coefficient (C-D) for internal-mixing twin-fluid (IMTF) atomizers is challenging, the effect of control factors remains inadequately understood, and comparative data on the C(D)of IMTF ... -
Spraying of viscous liquids: influence of the fluids mixing mechanism on the performance of the internal-mixing twin fluid atomizers
(MDPI, 2020-07-30)The thermal usage of liquid fuels implies their combustion, which is a process strongly influenced by the performance of the atomizer, which disrupts the fuel into drops of the required sizes. The spray quality of the ... -
Recent Advances in 3D Printing of Polyhydroxyalkanoates: A Review
(Sciendo, 2021-01-22)In the 21st century, additive manufacturing technologies have gained in popularity mainly due to benefits such as rapid prototyping, faster small production runs, flexibility and space for innovations, non-complexity of ... -
Standardizace bezpečnosti komunikace vlak-řídící centrum
(Univerzita Tomáše Bati ve Zlíně, 2020-11-27)Železniční infrastruktura je SoS (System of Systems) a skládá se z mnoha různých částí. Předmětné pod-systémy mají tendenci být propojeny jak fyzicky, tak prostřednictvím komunikačních technologií. Zajištění bezpečné ... -
Zdroje rizik spojené s tunely na pozemních komunikacích
(Univerzita Tomáše Bati ve Zlíně, 2020-11-27)Kritickými prvky dopravní infrastruktury v oblasti pozemních komunikací jsou také tunely. Jejich selhání znamená ztráty, škody a újmy nejen na samotné infrastruktuře, ale i na veřejných aktivech. Proto legislativa všech ... -
Volatile organic compounds in motor vehicle interiors under various conditions and their effect on human health
(Silesian University of Technology, Faculty of Transport and Aviation Engineering, 2020-05-17)The aim of this paper is to estimate the mass concentrations of volatile organic compounds (VOCs) such as benzene (B), toluene (T), ethylbenzene (E) and m-, p-, o-xylenes (X) inside of the driver-compartment of motor ... -
Cargo securing – comparison of the selected trucks
(Silesian University of Technology, Faculty of Transport, 2020-12-08)The paper deals with a comparison of shocks (values of acceleration coefficients and inertial forces) of two types of vehicles (T-810 and T-815 MK IV) during transport experiments on a motorway. The measurement was performed ... -
Investigation of structure of AlN thin films using Fourier-transform infrared spectroscopy
(Elsevier, 2020-02-19)This study focuses on structural imperfections caused by hydrogen impurities in AlN thin films obtained using atomic layer deposition method (ALD). Currently, there is a severe lack of studies regarding the presence of ... -
Blastfurnace Hybrid Cement withWaste Water Glass Activator: Alkali–Silica Reaction Study
(MDPI, 2020-08-17)Hybrid systems represent a new sustainable type of cement combining the properties of ordinary Portland cement and alkali-activated materials. In this study, a hybrid system based on blast furnace slag and Portland clinker ... -
Enhancing Security of Health Information Using Modular Encryption Standard in Mobile Cloud Computing
(IEEE, 2021-01-07)Despite the numerous and noticeable inherited gains of Mobile Cloud Computing (MCC) in healthcare, its growth is being hindered by privacy and security challenges. Such issues require the utmost urgent attention to realize ... -
A chemometric-assisted voltammetric analysis of free and Zn(II)-loaded metallothionein-3 states
(Elsevier, 2020-08-31)We focused on the application of mass spectrometry and electrochemical methods combined with a chemometric analysis for the characterization of partially Zn(II)-loaded metallothionein-3 species. The results showed decreased ... -
Co(II)-Based single-ion magnets with 1,1 '-ferrocenediyl-bis(diphenylphosphine) metalloligands
(Royal Society of Chemistry, 2020-09-07)Herein, we report on investigations of magnetic and spectroscopic properties of three heterobimetallic Fe(ii)-Co(ii) coordination compounds based on the tetracoordinate {CoP2X2} core encapsulated by dppf metalloligand, ... -
Classically determined effective Delta K fails to quantify crack growth rates
(Elsevier, 2020-08-01)Decomposition of the resistance to fatigue crack growth into the intrinsic and extrinsic component is very important for understanding of fatigue failure mechanisms, relation to microstructure and modelling of residual ... -
Using Cerenkov radiation for measuring the refractive index in thick samples by interferometric cathodoluminescence
(Elsevier, 2020-07-01)Cathodoluminescence (CL) has evolved into a standard analytical technique in (scanning) transmission electron microscopy. CL utilizes light excited due to the interactions between the electron-beam and the sample. In the ... -
Chemical Microrobots as Self-Propelled Microbrushes against Dental Biofilm
(Cell Press, 2020-09-23)Mouths offer the perfect environments for microbial cell formation, promoting the growth of biofilms, for example, on teeth. Dental biofilm exhibits strong resistance to antibiotics and is a cause of many dental diseases. ... -
Mixed-mode crack propagation in a semi-circular disc under bending made of an environmental-friendly concrete
(Elsevier, 2020-12-01)The paper is devoted to investigations on the crack deflection angle under mixed-mode loading conditions. Several semi-circular disc configurations with an inclined crack under three-point bending are suggested and its ... -
Impact of sonochemical synthesis condition on the structural and physical properties of MnFe2O4 spinel ferrite nanoparticles
(ELSEVIER, 2020-03-01)Herein, we report sonochemical synthesis of MnFe2O4 spinel ferrite nanoparticles using UZ SONOPULS HD 2070 Ultrasonic homogenizer (frequency: 20 kHz and power: 70 W). The sonication time and percentage amplitude of ultrasonic ...