Convective heat transfer inside planar solar collectors
MetadataПоказать полную информацию
There is a permanent interest in improving the construction and thermal properties of the planar solar collectors. Minimizing the heat losses of the collectors and improving their energy gains are some of the relevant research goals. Convective heat transfer inside the cavity of planar collectors has been determined theoretically and numerically in this conference contribution. The convective heat transfer is computed on the basis of physical relations using the correlation relations of Nusselt’s number. The Nusselt number has been expressed by means of Rayleigh`s and Prandtl’s numbers. The convective heat transfer inside the cavities of planar solar collectors represents essential part of heat losses that lower the effectiveness of these collectors. In this conference contribution the convective heat losses have been compared with the standard density of heat flow coming from the Sun and the corresponding energy ratio has been determined. It has been shown that this ratio amounts almost 10 %. A typical summer environment has been supposed with a standard sunshine reaching 1000 Wm-2. The common type of the planar solar collector with geometrical dimensions 2m x 1m x 0.05m and cavity filled by air has been investigated. The temperature of the absorber has been supposed to be 70 °C whereas the temperature of the glass plate placed on the top side of the collector has been assumed to be 35 °C.
KeywordsSolar collector, convective heat transfer, Nusselt number, correlation function, heat loss.
Document typePeer reviewed
Document versionFinal PDF
SourceIOP Conference Series: Materials Science and Engineering. 2020, vol. 960, issue 1, p. 1-5.
- Ústav fyziky