Show simple item record

dc.contributor.authorChabannes, Liliancs
dc.contributor.authorŠtefan, Davidcs
dc.contributor.authorRudolf, Pavelcs
dc.date.accessioned2021-08-12T14:55:52Z
dc.date.available2021-08-12T14:55:52Z
dc.date.issued2021-06-24cs
dc.identifier.citationENERGIES. 2021, vol. 14, issue 13, p. 1-13.en
dc.identifier.issn1996-1073cs
dc.identifier.other171988cs
dc.identifier.urihttp://hdl.handle.net/11012/200961
dc.description.abstractThe usage of splitter blades to enhance the performances of low specific speed pumps is common practice. Based on experimental and numerical studies, the influence of the addition of one and two splitter blades is investigated on a very low specific speed pump to assess their impact not only on the performance characteristics but also on the losses in all pump domains. First, the main characteristic curves are discussed and it is shown that the usage of splitter blades enhances the head of the pump while not impairing its efficiency. Secondly, a detailed analysis of the losses in the pump reveals that splitter blades improve the flow in all parts of the pumps, but the volute. The flow at the impeller outlet shows that splitter blades largely benefit the slip factor and discharges a more blade-congruent flow in the volute. However, higher absolute velocity at the outlet of the impeller with splitter blades increases friction at the volute wall, as confirmed by the average wall shear stress in the different tested cases.en
dc.formattextcs
dc.format.extent1-13cs
dc.format.mimetypeapplication/pdfcs
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofENERGIEScs
dc.relation.urihttps://www.mdpi.com/1996-1073/14/13/3785cs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectlow specific speeden
dc.subjectnumerical simulationen
dc.subjectsplitter bladesen
dc.subjectvoluteen
dc.subjectcentrifugal pumpen
dc.titleEffect of Splitter Blades on Performances of a Very Low Specific Speed Pumpen
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. EÚ-odbor fluidního inženýrství Viktora Kaplanacs
sync.item.dbidVAV-171988en
sync.item.dbtypeVAVen
sync.item.insts2021.08.12 16:55:52en
sync.item.modts2021.08.12 16:14:38en
dc.coverage.issue13cs
dc.coverage.volume14cs
dc.identifier.doi10.3390/en14133785cs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1996-1073/cs
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International