Chemical Stability of Innovative Grouts for Cast Basalt Elements

Loading...
Thumbnail Image
Date
2021-01-18
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
IOP Publishing
Altmetrics
Abstract
Newly developed tile grouts are intended mainly for environment with strong chemical loading. For this reason, chemical resistance was one of the key parameters observed. The grout for cast basalt tile was polymer based, in particular with epoxide binder and it utilized solidified hazardous wastes as fillers. It is well-known that epoxide binder has high resistance to solutions of inorganic substances. However, it is easily degraded by organic compounds. This was taken into consideration when assessed aggressive environments and their concentrations were selected. Examined substances were 60% solution of sulfuric acid, vapors of this acid (at concentration 96%) and 10% solution of acetic acid. After exposition to action of these aggressive substances, first of all the visual changes were assessed, i.e. change of color, formation of blisters, cracks, flaking or change of sheen. Then influence on microstructure, changes of bulk density and strengths of materials were observed.
Nově vyvinuté spárovací hmoty jsou určeny hlavně do prostředí se silným chemickým namáháním. Z tohoto důvodu byla chemická odolnost jedním z klíčových pozorovaných parametrů. Spárovací hmota pro dlažby z taveného čediče byla na bázi polymeru, konkrétně s epoxidovým pojivem, a jako plniva využívala solidifikované nebezpečné odpady. Je dobře známo, že epoxidové pojivo má vysokou odolnost vůči roztokům anorganických látek. Je však snadno degradovatelný organickými sloučeninami. Toto bylo vzato v úvahu při výběru agresivního prostředí a jejich koncentrací. Zkoumanými látkami byly 60% roztok kyseliny sírové, páry této kyseliny (v koncentraci 96 %) a 10% roztok kyseliny octové. Po vystavení působení těchto agresivních látek byly nejprve hodnoceny vizuální změny, tj. Změna barvy, tvorba puchýřů, praskliny, odlupování nebo změna lesku. Poté byl pozorován vliv na mikrostrukturu, změny objemové hmotnosti a pevnosti materiálů.
Description
Citation
IOP Conference Series: Materials Science and Engineering. 2021, vol. 1039, p. 1-7.
https://iopscience.iop.org/article/10.1088/1757-899X/1039/1/012024/pdf
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution 3.0 Unported
http://creativecommons.org/licenses/by/3.0/
Citace PRO