A New Method for Designing Modified Compact Microstrip LPF with Sharp Roll-Off and Wide Stopband
MetadataПоказать полную информацию
A new method for designing a compact microstrip lowpass filter (LPF) with wide stopband width (SBW) and sharp roll off (ROF) is presented. In proposed designing procedure, high impedance microstrip lines are bent to achieve an LPF with compact size. Then, to compensate for the effect of bending microstrip lines, the lengths of the lines are mathematically modified. Moreover, adding a suppressing cell composed of Radial stub resonator and a Butterfly stub resonator increases the SBW. Also, an elliptic filter structure is used to obtain sharp ROF. In this work, an LPF with 1.12 GHz cutoff frequency, 0.147 λg 0.133 λg filter size; where λg is the guided wavelength at cutoff frequency, the SBW equal to 13.4 GHz, and the ROF more than 201 dB / GHz, is designed, simulated and fabricated to demonstrate efficiency of the proposed method. Also, the other conventional characteristics for the fabricated LPF such as 0.3 dB insertion loss, 14.4 dB return loss, and suppression factor equal to 2.2, are in the appropriate range of their amounts.
Document typePeer reviewed
Document versionFinal PDF
SourceRadioengineering. 2021 vol. 30, č. 4, s. 662-669. ISSN 1210-2512
- 2021/4