SEM Micromanipulator as Current Collector for Battery In-situ Characterization
Loading...
Date
2022
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií
Abstract
The aim of the work is to develop an in-situ method for electrode microstructure investigation by scanning electron microscopy (SEM). In the first part, the preparation of a model battery using FIB-SEM system is described, which consists of lithium metal, ionic liquid, and lithium titanate oxide (LTO) attached on a micromanipulation needle by platinum deposition. The needle is used for handling and at the same time as a current collector, which facilitates subsequent analysis. Open-circuit voltage (OCV), cyclic voltammetry (CV), and galvanostatic cycling measurements (GCPL) was done on the cell assembled (and imaged) in SEM. After seven complete cycles, a cross-section of LTO electrode using FIB was prepared and the surface solid electrolyte interface (SEI) layer was observed. Challenges connected with battery preparation are described and possible solutions for future testing are proposed. The work is evolved in cooperation with Thermo Fisher Scientific Brno.
Description
Citation
Proceedings I of the 28st Conference STUDENT EEICT 2022: General papers. s. 398-402. ISBN 978-80-214-6029-4
https://conf.feec.vutbr.cz/eeict/index/pages/view/ke_stazeni
https://conf.feec.vutbr.cz/eeict/index/pages/view/ke_stazeni
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
© Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií