Charakterizace materiálů a pokročilé povlaky 1-06
Browse by
Recent Submissions
-
Characterization of Polyvinylidene Fluoride (PVDF) Electrospun Fibers Doped by Carbon Flakes
(MDPI, 2020-11-24)Polyvinylidene fluoride (PVDF) is a modern polymer material used in a wide variety of ways. Thanks to its excellent resistance to chemical or thermal degradation and low reactivity, it finds use in biology, chemistry, and ... -
Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats
(Elsevier, 2020-02-19)This contribution deals with thermal cycling of thermal barrier coatings (TBCs) with NiCrAlY and NiCoCrAlY bond-coats, and yttria stabilized zirconia (YSZ) top-coat that were prepared by atmospheric plasma spraying from ... -
Synergistic Effect of Chitosan and Selenium Nanoparticles on Biodegradation and Antibacterial Properties of Collagenous Scaffolds Designed for Infected Burn Wounds
(MDPI, 2020-10-05)A highly porous scaffold is a desirable outcome in the field of tissue engineering. The porous structure mediates water-retaining properties that ensure good nutrient transportation as well as creates a suitable environment ... -
Local retinoic acid signaling directs emergence of the extraocular muscle functional unit
(PLOS, 2020-11-17)Coordinated development of muscles, tendons, and their attachment sites ensures emergence of functional musculoskeletal units that are adapted to diverse anatomical demands among different species. How these different ... -
A Simple Drug Delivery System for Platelet-Derived Bioactive Molecules, to Improve Melanocyte Stimulation in Vitiligo Treatment
(MDPI, 2020-09-10)Vitiligo is the most common depigmentation disorder of the skin. Currently, its therapy focuses on the halting of the immune response and stimulation of the regenerative processes, leading to the restoration of normal ... -
Piezoelectric Current Generator Based on Bismuth Ferrite Nanoparticles
(MDPI, 2020-11-25)Bismuth ferrite nanoparticleswith an average particle diameter of 45 nmand spatial symmetry R3c were obtained by combustion of organic nitrate precursors. BiFeO3-silicone nanocomposites with various concentrations of ... -
Experimental Investigation of Critical Heat Flux on Different Surfaces at Low Pressure and Low Flow
(MDPI, 2020-10-06)Steady state flow boiling experiments were carried out on several heated tubes with outer diameter 9.14 mm at outlet pressures 120, 200 and 300 kPa, inlet temperatures 64, 78 and 91 °C and approximately 400, 500, 600 and ... -
Heat treatment induced phase transformations in zirconia and yttriastabilized zirconia monolithic aerogels
(Elsevier, 2019-07-01)Monolithic, structurally stable zirconia (ZrO2) aerogels can be used in high temperature applications and as medical implants. The macroscopic properties of these solids can be fine-tuned by the appropriate thermal treatment ... -
Surface Modification and Enhancement of Ferromagnetism in BiFeO3 Nanofilms Deposited on HOPG
(MDPI, 2020-10-09)BiFeO3 (BFO) films on highly oriented pyrolytic graphite (HOPG) substrate were obtained by the atomic layer deposition (ALD) method. The oxidation of HOPG leads to the formation of bubble regions creating defective regions ... -
Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill
(Elsevier, 2018-10-15)In this paper, the erosion behavior of three types of protective thermally-sprayed coatings and non-coated substrate steel was investigated under semi-industrial test conditions using a laboratory high-speed pin mill DESI-11. ... -
Non-destructive lock-picking of a historical treasure chest by means of X-ray computed tomography
(PLOS, 2020-07-06)An innovative approach to a non-destructive lock mechanism examination by means of X-ray computed tomography (CT) was involved in a careful opening of a locked 19(th)century chest missing the key, as an interdisciplinary ... -
The role of different high energy ball milling conditions of molybdenum powder on the resulting particles size and morphology
(Tanger Ltd., 2019-05-24)High energy ball milling is a powder processing method in which the powder particle size can be decreased to micrometer size in a relatively short period of time. This method is based on the friction and the high energy ... -
Effects of Cryopreservation on Cell Metabolic Activity and Function of Biofabricated Structures Laden with Osteoblasts
(MDPI, 2020-05-01)Biofabrication and maturation of bone constructs is a long-term task that requires a high degree of specialization. This specialization falls onto the hierarchy complexity of the bone tissue that limits the transfer of ... -
Selective Laser Melting Strategy for Fabrication of Thin Struts Usable in Lattice Structures
(MDPI, 2018-09-18)This paper deals with the selective laser melting (SLM) processing strategy for strut-lattice structure production which uses only contour lines and allows the porosity and roughness level to be managed based on ombination ... -
Analysis of neural crest-derived clones reveals novel aspects of facial development
(American Association for the Advancement of Science (AAAS), 2016-08-03)Cranial neural crest cells populate the future facial region and produce ectomesenchyme-derived tissues, such as cartilage, bone, dermis, smooth muscle, adipocytes, and many others. However, the contribution of individual ... -
Benchmark classification dataset for laser-induced breakdown spectroscopy
(Springer Nature, 2020-02-13)In this work, we present an extensive dataset of laser-induced breakdown spectroscopy (LIBS) spectra for the pre-training and evaluation of LIBS classification models. LIBS is a well-established spectroscopic method for ... -
Influence of isothermal oxidation on microstructure of YSZ and Mullite-YSZ thermal barrier coatings
(Elsevier, 2020-02-19)Microstructural changes in conventional yttria stabilized zirconia (YSZ) and multilayer Mullite-YSZ/YSZ (M-YSZ) thermal barrier coatings were compared based on high temperature isothermal oxidation at the temperatures of ... -
The Effect of the Thermosensitive Biodegradable PLGA–PEG–PLGA Copolymer on the Rheological, Structural and Mechanical Properties of Thixotropic Self-Hardening Tricalcium Phosphate Cement
(MDPI, 2019-01-17)The current limitations of calcium phosphate cements (CPCs) used in the field of bone regeneration consist of their brittleness, low injectability, disintegration in body fluids and low biodegradability. Moreover, no method ... -
Algal Biomass Analysis by Laser-Based Analytical Techniques - A Review
(MDPI AG, 2014-09-23)Algal biomass that is represented mainly by commercially grown algal strains has recently found many potential applications in various fields of interest. Its utilization has been found advantageous in the fields of ... -
High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron composites for temporal reduction of bone fractures
(Elsevier, 2018-02-09)In this work alpha tricalcium phosphate (a-TCP)/iron (Fe) composites were developed as a new family of biodegradable, load-bearing and cytocompatible materials. The composites with composition from pure ceramic to pure ...