Ústav technologie, mechanizace a řízení staveb
Browse by
Recent Submissions
-
Non-graphical data structure for the purpose of BIM-based Life Cycle Assessment: Methodology for the Czech environment
(IOP Publishing, 2020-12-15)The article deals with the data structure for the purpose of life cycle assessment of buildings using the Building Information Model (BIM), for implementation in the Czech construction industry. Construction industry ... -
Research Summary on Characterizing Impact of Environment on Adhesion of Sealed Joints in Façade Applications
(MDPI, 2020-10-29)The presented paper summarizes the main research findings on the impact of the environment concerning the durability and service life of building joint sealants. The focus is placed on sealed joints in façade applications, ... -
Reconstruction of the terrazzo surface in the exterior
(EDP Sciences, 2019-04-12)The article deals with terrazzo surface that is done in the exterior and which shows defects and faults after execution. It was an entry portal of an unnamed institution where the placed surface began to show flaws more ... -
Construction machines as a source of construction noise
(Elsevier, 2017-06-02)The contribution deals with issues concerning the modelling of the production area of a construction site from the aspect of the placement of construction machines, which are a source of noise for the protected area outside ... -
The Effect of Oriented Strand Board Substrate Treatments on the Adhesion of Cement Adhesives and Coatings
(IOP Publishing, 2019-11-15)Thanks to its properties, wood as a building material has unbelievable potential. It simultaneously provides answers to frequently discussed questions concerning the renewability of resources and the energy performance of ... -
Determination of Tensile Properties of Selected Building Sealants in Combination with High-pressure Compact Laminate (HPL)
(Elsevier Ltd., 2015-07-01)One of the current issues in the Czech building industry is an efficient implementation of seal joint between constructions. An undesirable penetration of water, moisture or air between structural elements may have a ... -
Construction process optimisation - review of methods, tools and applications
(HSGI - Croatian Association of Civil Engineers, 2018-08-10)A review of current heuristic techniques and mathematical programming methods is presented in the paper. Modern optimisation modelling tools are presented, common construction optimisation problems are described, and an ... -
Survey Of Accomplishments in BIM Implementation in Croatia, The Czech Republic, Germany and Slovenia
(Josip Juraj Strossmayer University of Osijek, Faculty of Civil Engineering Osijek, 2017-12-15)Building information modelling (BIM) may currently be considered the fastest developing concept in the field of construction management, aiming to become a global standard. Although the roots of the concept date back to ... -
Determination of Adhesion of Silyl Modified Polymer Adhesives to Wooden Façade Cladding – Case Study
(Elsevier Ltd., 2015-07-01)Adhesives are currently very often designed specifically for bonded façade systems. The potential of bonded joints should be studied and described in more detail and verified through experimental measurements. Presented ... -
Comparison of Adhesive Properties of Polyurethane Adhesive System and Wood-plastic Composites with Different Polymers after Mechanical, Chemical and Physical Surface Treatment
(MDPI, 2019-03-01)The cost of most primary materials is increasing, therefore, finding innovative solutions for the re-use of residual waste has become a topic discussed more intensely in recent years. WPCs certainly meet some of these ... -
Influence of Technological Procedures on Mechanical Properties of Bonded Joint
(Springer Nature, 2018-12-24)It would not be an exaggeration to say that adhesive joints have been an essential part of the construction industry for several decades now. However, a substantial disadvantage of bonded joints are the very strict ... -
Testing the Influence of the Material Bonding System on the Bond Strength of Large-Format Tiles Installed on Concrete Substrate under Mechanical Loading
(MDPI, 2020-07-17)The paper describes an experiment focusing on the way the material system influences the bond strength of large-format tiles installed on concrete substrate during mechanical loading under conditions that correspond to ... -
Use of Prefabrication in Staircase Solutions in Multi-storey Apartment Blocks Based on Wooden Structures
(IOP Publishing, 2019-09-18)Structural design of the staircase is a separate issue in the design and realization of residential buildings. The design needs to be addressed in terms of static, fire safety, layout requirements and in the case of ... -
Optimisation of surface finishes for oriented strand board in order to increase its moisture resistance
(IOP Publishing, 2019-09-18)The purpose of the research is the optimisation of surface finishes for application to oriented strand board (OSB) in order to increase its moisture resistance. The aim of the research is to compare test specimens with ... -
Ageing of Adhesive Joints for Façade Applications – Comparison of Artificial and Real Weathering Conditions
(EDP Sciences, 2019-04-12)Currently, the adhesive joints are more and more regularly used as an alternative to mechanical joints. They often offer a more suitable, durable and faster possibility. They provide a solution with a more even distribution ... -
Impact on Total Costs and Construction Period of Residential Buildings in Prague
(IOP Publishing, 2019-03-04)Optimization is a common and very often necessary process performed for economic reasons during the realization of construction projects. This report presents the optimization of a residential project at the beginning of ... -
Selection of a lifting mechanism for a small-scale construction project: A comparative method based on building volume and an automated schedule
(IOP Publishing, 2019-03-04)The selection of construction machinery for a project is a very important part of the construction process. Rigorous preparation for construction is very often neglected in practice even though three fifths of the construction ... -
Protection of workers and third parties during the construction of linear structures
(IOP Publishing, 2017-12-21)The minimization of risk in the workplace through a focus on occupational health and safety (OHS) is one of the primary objectives for every construction project. The most serious accidents in the construction industry ... -
Characteristics of recycled concrete aggregates from precast slab block buildings
(IOP Publishing, 2017-11-04)Precast slab block buildings (PSBB) typically and frequently occur in Central and Eastern Europe, as well as elsewhere in the world. Some of these buildings are currently used beyond their service life capacity. The ... -
Influence of Load-bearing Structure on Size of Bonded Facade Cladding
(EDP Sciences, 2018-06-25)Abstract. Architecture has been an integral part of our lives ever since people first existed. Structures are required by both investors and society to have what is considered a highly modern appearance while maintaining ...