• Mitochondria morphology and membrane potential under stress conditions 

  Ezati, Masoumeh; Zumberg, Inna; Cmiel, Vratislav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  Mitochondria, organelles found in the cytoplasm of almost all eukaryotic cells, generate large quantities of energy in the form of adenosine triphosphate (ATP). In addition to producing energy, mitochondria store calcium ...

• History of EVs and measuring battery under external force. 

  Šedina, M.; Kazda, T. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  This article describes the modern history of electromobility with the prediction of its market growth and the drivers of change. There are mentioned Li-ion battery's anode materials with their basic parameters and one of ...

• Testing of UWB Sensors For Use in Multi-robot Relative Localization Systems and Design of UWB Plugin for ROS/Gazebo Simulation Environment 

  Raichl, P.; Marcon, P. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  This paper studies the possibility of using UWB sensors DWM1000 as a part of relative localization systems and a part of local avoidance systems in multi-robot systems, especially UAV swarms. The first part of the paper ...

• Nanoporous Enzyme-Based Impedimetric Biosensor 

  Košelová, Z. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  The ordered nanopores surfaces has been studied in the field of biosensors for the detection of affinity interactions such as antigen-antibody or nucleic acid hybridization. Nanopores are frequently fabricated by anodic ...

• Calculating the Cortical Thickness of Brain by using electrical and mathematical models for Optimal Transcranial Direct Current Stimulation 

  Hamza, Ali; Mezl, Martin; Zafar, Saima (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  transcranial direct current stimulation (tDCS) is one of the most well-known brain stimulation techniques. In this technique, a constant low intensity (4mA to 5mA) current provides to the brain to modulate the excitability ...

• Identification of horizontal genes transfer elements across strains inhabiting the same niche using pan-genome analysis 

  Schwarzerová, J.; Čejková, D. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  Tracing horizontal gene flux across strains in farm animals is one of the important steps for research focused on detection and genomic enzymology of genes conferring antibiotic resistance. In this study, we have built the ...

• Performance comparison of a signal processing pipeline execution using CPU and GPU 

  Tomašov, A.; Horváth, T. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  The paper compares the execution performance of NumPy and PyTorch mathematical libraries in embedded systems with graphics processing unit (GPU) acceleration. Both frameworks execute a signal processing pipeline from a ...

• Analyses of apedal locomotion systems based on ferroelastomers 

  Kouakouo, S.; Böhm, V.; Zimmermann, K. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  In this paper, the movement behavior of amoeboid locomotion system is investigated and the theoretical proof of the locomotion of the system is provided with the finite element method. It is shown that not only the speed ...

• SIFT and SURF based feature extraction for the anomaly detection 

  Bilik, S.; Horak, K. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  In this paper, we suggest a way to use SIFT and SURF algorithms to extract the image features for anomaly detection. We use those feature vectors to train various classifiers on a real-world dataset in the semi-supervised ...

• Lithographic thin–film structures based on Electrochromic materials: Case study by scanning probe microscopy 

  Misiurev, Denis (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  The main object of this study will be based on producing and characterization of lithographic thin–film structures produced based electrochromic materials. Atomic force microscopy will be used as a main method of evaluation ...

• SEM Micromanipulator as Current Collector for Battery In-situ Characterization 

  Klvač, O.; Kazda, T.; Fam, Y.; Novák, L. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  The aim of the work is to develop an in-situ method for electrode microstructure investigation by scanning electron microscopy (SEM). In the first part, the preparation of a model battery using FIB-SEM system is described, ...

• Characterization of osteolytic lesions by low-dose spectral CT in myeloma patients 

  Nohel, M.; Jan, J.; Chmelik, J. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  This paper presents a preliminary study of characterization of focal osteolytic lesions in low-dose spectral CT in myeloma patients. Spectral CT with energy decomposition into two energies allows us to use post-processing ...

• Optimization of electrostatic simulation by utilization of distribution equations with emphasis on design of capacitance sensors of inhomogeneity distance 

  Mancl, V.; Beneš, P. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  This paper deals with the problem of optimizing the simulation of electrostatic fields with a focus on electrode setup simulations for capacitive sensor design. Several simulations were performed in Ansys electronics desktop ...

• Complex systems resilience qualification 

  Dvorský, P.; Baštán, O.; Fiedler, P. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  This paper focuses on resilience qualification and propose a new method of measuring resilience within the systems. Within the paper is discussed the concept of resilience. Further, there is a defined general complex system ...

• Design of hybrid computer for modelling of dynamic systems 

  Rujzl, Miroslav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  This paper deals with the design of an analog computer with digitally controlled components for the simulation of linear and nonlinear dynamic systems or for the study of transfer functions of electronic filter or oscillator ...

• Anisotropic Forward Modeling of Electroencephalogram in MATLAB - CST Studio Suite Interface 

  Kuřátko, D.; Raida, Z (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  A forward model of an electroencephalogram (EEG) is a necessary part of an EEG source analysis and plays a crucial role in accuracy of brain waves localization. The paper is aimed to exploit CST Studio Suite (CST) for an ...

• Multiscale Modelling of Li-Ion Battery Volume Expansion 

  Mačák, M.; Vyroubal, P. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  Mechanical characteristics of Li-ion batteries play an important part in the design of electric devices or energy storage systems. Proper mechanical design can increase the safety and the longevity of devices. Apart from ...

• Study of the effect of tissue conductivity on electroporation 

  Hemzal, M.; Aubrecht, V. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  This paper deals with two different dynamic models of electrical conductivity and a static model for electroporation. Those models were used to calculate electric field distribution in the tissue, the current and the volume ...

• Analysis of Car Drivers’ Behaviour and Driving Style 

  Novik, S.; Mihálik, O. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  Driving security remains one of the important issues. Nowadays, various assistance systems are implemented, such as the systems for analysis of control of a car by its driver. To understand the performance of the driver’s ...

• Optimization of wavelet transform in the task of intracardiac ECG segmentation 

  Ředina, R. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2022)

  My work deals with the selection of an appropriate wavelet transform setting for feature extraction from intracardiac ECG recordings. The studied signals were obtained during electrophysiological examinations at the ...

View more