Parcourir Pokročilé keramické materiály par date de publication
Voici les éléments 1-19 de 30
-
Master Sintering Surface – A Practical Approach to Its Construction and Utilization for Spark Plasma Sintering Prediction
(International Institute for the Science of Sintering, 2012-08-01)The sintering is a complex thermally activated process, thus any prediction of sintering behaviour is very welcome not only for industrial purposes. Presented paper shows the possibility of densification prediction based ... -
Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate
(International Institute for the Science of Sintering, Beograd, 2014-09-01)In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were ... -
Ion Distributions at ElectrifiedWater-Organic Interfaces: PB-PMF Calculations and Impedance Spectroscopy Measurements
(The Electrochemical Society, 2015-09-07)The interface between two immiscible electrolyte solutions consisting of alkali chlorides in water and the organic electrolyte BTPPATPFB in 1,2-dichloroethane is characterized with X-ray reflectivity, interfacial tension ... -
Cold-setting Inkjet Printed Titania Patterns Reinforced by Organosilicate Binder
(MDPI, 2015-09-11)Preparation of photocatalytic active layers by cold-setting inkjet printing. Comparison of printed, UV-cured and sintered layers; their physical properties, as well as, photocatalytic and electrophotocatalytic properties. -
Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique
(International Institute for the Science of Sintering, Beograd, 2016-05-01)Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, ... -
A Practical Approach for the Calculation of the Activation Energy of the Sintering
(International Institute for the Science of Sintering, 2016-12-15)Newly developed software for calculation of activation energy (Qs in the following) of sintering using the Wang and Raj model is presented. To demonstrate the practical potential of the software and to evaluate the behaviour ... -
Acheson, Silicon Carbide, and the Electric Arc
(The Electrochemical Society, 2017-03-15)This historical article looks at the technological discovery of Edward Goodrich Acheson of silicon carbide as one of the number of technological discoveries of the end of 19th century based on the use of electricity and ... -
Luminescent Eu3+-doped transparent alumina ceramics with high hardness
(Elsevier, 2017-05-17)The Eu3+-doped transparent aluminas were prepared by wet shaping technique followed by pressureless sintering and hot isostatic pressing. The effect of dopant amount on microstructure, real in-line transmission (RIT), ... -
Luminescent Er3+doped transparent alumina ceramics
(Elsevier, 2017-07-01)We report on successful preparation of Er3+doped transparent alumina (0.1–0.17 at.%) exhibiting visible light photoluminescence using wet shaping method and hot isostatic pressing. The effects of dopantamount, type of ... -
Optical, mechanical and fractographic response of transparent alumina ceramics on erbium doping
(Elsevier, 2017-11-01)Alumina ceramics found their utilisation in many applications which can be further extend by attaining functional properties; in our case the transparency obtained through precise processing and photoluminescence due to ... -
Microstructure and Phase Composition Of Steatite Ceramics Sintered by Traditional and Spark Plasma Sintering
(International Institute for the Science of Sintering, Beograd, 2018-03-01)The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite ... -
Availability of Suitable Raw Materials Determining the Prospect for Energy Storage Systems Based on Redox Flow Batteries
(Faculty of Mining, Ecology, Process Control and Geotechnologies (FBERG), Technical University of Kosice, 2018-04-30)Successful large-scale deployment and manufacturing of newly designed products depends on the availability of raw materials and therefore even fundamental research on electrochemical energy sources cannot ignore the need ... -
The Effect of the Thermosensitive Biodegradable PLGA–PEG–PLGA Copolymer on the Rheological, Structural and Mechanical Properties of Thixotropic Self-Hardening Tricalcium Phosphate Cement
(MDPI, 2019-01-17)The current limitations of calcium phosphate cements (CPCs) used in the field of bone regeneration consist of their brittleness, low injectability, disintegration in body fluids and low biodegradability. Moreover, no method ... -
Transparent alumina ceramics: Effect of standard and plasma generated stabilizing approaches in colloidal processing
(Wiley, 2019-10-04)The study is focused on an optimization of the slipcasting process used for the fabrication of the transparent/translucent alumina ceramics; more precisely, on specifying the most appropriate way to stabilize the cast ... -
Structure–Properties Relationship of Electrospun PVDF fibers
(MDPI, 2020-06-23)Electrospinning as a versatile technique producing nanofibers was employed to study the influence of the processing parameters and chemical and physical parameters of solutions on poly(vinylidene fluoride) (PVDF) fibers’ ... -
Machinability and properties of zirconia ceramics prepared by gelcasting method
(TAYLOR & FRANCIS LTD, 2020-08-17)The machinability of newly developed zirconia ceramics for computer numerically controlled milling (CNC) was investigated. The zirconia blanks were prepared by the gelcasting method and tested in the green and two pre-sintered ... -
Influence of Hydroxyapatite Nanoparticles and Surface Plasma Treatment on Bioactivity of Polycaprolactone Nanofibers
(MDPI, 2020-08-20)Nanofibers are well known as a beneficial type of structure for tissue engineering. As a result of the high acquisition cost of the natural polymers and their environmentally problematic treatment (toxic dissolution agents), ... -
Characterization of Polyvinylidene Fluoride (PVDF) Electrospun Fibers Doped by Carbon Flakes
(MDPI, 2020-11-24)Polyvinylidene fluoride (PVDF) is a modern polymer material used in a wide variety of ways. Thanks to its excellent resistance to chemical or thermal degradation and low reactivity, it finds use in biology, chemistry, and ... -
Electrical and optical characterization of Os-substituted rare-earth orthoferrite YbFeO3-gamma powders
(Springer Nature, 2021-01-02)The electrical properties of Os-doped YbFeO3 (YbFO) powders prepared by solid-state reaction have been studied by Impedance Spectrometer/Impedance Spectrometer. SEM, XPS and Raman spectroscopy were utilized for understanding ...