Kotvení předpjaté frp výztuže pro betonové konstrukce
Loading...
Date
2012-01
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně, Ústav soudního inženýrství
Abstract
Předpětí FRP výztuže v betonových konstrukcích eliminuje její negativní vlastnost, kterou je nízký modul pružnosti. Článek popisuje vyvinutý způsob kotvení, který požívá FRP materiály i pro kotevní oblast. Základní princip návrhu je popsán v textu. Výsledky analytického návrhu jsou porovnány s experimenty, které byly provedeny v rámci řešení výzkumného projektu AdMaS.
Non-metallic reinforcement has many advantages, but there are some areas of application that need to be resolved to improve the usage of FRP reinforcement in real conditions. One of the disadvantages of FRP reinforcement is its lower modulus of elasticity, which leads to greater deflections of structures and can also cause early propagation of cracks. The paper deals with the possibility of eliminating this problem by prestressing the reinforcement. It covers several problems related to anchoring and current anchoring methods used world-wide. The paper also mentions some drawbacks of these methods. In an effort to bypass these drawbacks a new anchoring method has been developed. It differs in the way longitudinal forces are transferred from the bar to the surrounding concrete. Basically, it is based on the addition of an additional anchoring member (cylinder) on the surface. This member is made of polymers so the whole system remains completely steel-free and very simple to produce. Before using the system in real structures a series of tests were performed and the results are presented. Also, some prestressed test panels were prepared and compared with standard panels.
Non-metallic reinforcement has many advantages, but there are some areas of application that need to be resolved to improve the usage of FRP reinforcement in real conditions. One of the disadvantages of FRP reinforcement is its lower modulus of elasticity, which leads to greater deflections of structures and can also cause early propagation of cracks. The paper deals with the possibility of eliminating this problem by prestressing the reinforcement. It covers several problems related to anchoring and current anchoring methods used world-wide. The paper also mentions some drawbacks of these methods. In an effort to bypass these drawbacks a new anchoring method has been developed. It differs in the way longitudinal forces are transferred from the bar to the surrounding concrete. Basically, it is based on the addition of an additional anchoring member (cylinder) on the surface. This member is made of polymers so the whole system remains completely steel-free and very simple to produce. Before using the system in real structures a series of tests were performed and the results are presented. Also, some prestressed test panels were prepared and compared with standard panels.
Description
Citation
Sborník příspěvků konference Expert Forensic Science Brno 2012. s. 259-264. ISBN 978-80-214-4412-6
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
cs
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
© Vysoké učení technické v Brně, Ústav soudního inženýrství