Návrh a realizace přídavného modulu laboratorního zařízení pro měření tření v mazaných kontaktech

Loading...
Thumbnail Image
Date
ORCID
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Bakalářská práce se zabývá návrhem a realizací laboratorního modulu pro měření součinitele tření, resp. třecích sil v elastohydrodynamicky mazaných kontaktech současně ve dvou osách. Motivace k realizaci tohoto modulu byla absence podobného zařízení. Rešeršní část práce je věnována tribologii, tenzometrickým snímačům síly a poddajným strukturám. V konstrukční části je řešen výběr vhodného konceptu modulu a snímačů síly. Následně je pomocí MKP analýz navržena poddajná struktura s materiálovými klouby umožňující posuv kontaktního členu ve směru působících třecích sil v mazaném kontaktu. Navržený modul byl vyroben, implementován na laboratorní zařízení a byla otestována jeho funkčnost. Podle výsledků měření modul naplnil cíle práce.
This bachelor‘s thesis presents the design and implementation of a module of laboratory device for measuring coefficient of friction and friction forces in elastohydrodynamic lubricated contacts. The module is able to measure friction forces in two perpendicular axes. A motivation for realization of this module was the absence of a similar equipment. The retrieval section of this thesis is dedicated to tribology, strain gauges (force sensors) and compliant mechanisms. The selection of the appropriate concept of the module and the force transducers is solved in the design part of thesis. The compliant mechanism with flexure hinges was designed via FEM analysis. This mechanism allows the displacement of the contact member of module in the direction of the frictional forces acting within a lubricated contact. The proposed module was manufactured, implemented in laboratory equipment and its functionality was tested. According to preliminary results, the module fulfilled the objectives of this thesis.
Description
Citation
STIFTER, J. Návrh a realizace přídavného modulu laboratorního zařízení pro měření tření v mazaných kontaktech [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2016.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Základy strojního inženýrství
Comittee
doc. Ing. David Paloušek, Ph.D. (předseda) prof. Ing. Ivan Křupka, Ph.D. (místopředseda) doc. Ing. Pavel Mazal, CSc. (člen) doc. Ing. Daniel Koutný, Ph.D. (člen) Ing. Zbyněk Strecker, Ph.D. (člen) Ing. Petr Šperka, Ph.D. (člen)
Date of acceptance
2016-06-20
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení
DOI
Collections
Citace PRO