Elektrochemické metody přípravy kovokeramických oxidačně odolných vrstev

Loading...
Thumbnail Image
Date
ORCID
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Na vzorcích z čistého hliníku (99,99+ %, VÚK čisté kovy, s. r. o.) a na vzorcích čistého titanu (99,95 %, Goodfellow) s vrstvou naprášeného hliníku (99,99 %, VÚK čisté kovy, s. r. o.) byl proveden technologický postup s cílem připravit oxidačně a tepelně odolnou kovokeramickou vrstvu. Na vzorcích byla prostřednictvím anodizace v kyselině šťavelové připravena oxidická vrstva s jemnými, hexagonálně uspořádanými póry o průměru 30 nm. Během dalšího zpracování vzorků byla struktura uzpůsobena pro elektrochemickou depozici mědi do pórů. Cílem elektrodepozice bylo vytvoření měděných nanodrátů nanesených do pórů oxidické vrstvy. Proces probíhal v roztoku síranu měďnatého a kyseliny sírové ve vodě. Řídícím parametrem depozice bylo napětí, jež mělo výrazně asymetrický průběh periody, kterou bylo nutné pro úspěšné vytvoření drátů optimalizovat. Výsledkem celého procesu byla struktura s oxidickou matricí, jejíž póry byly z velké části zaplněny mědí.
A process with aim to prepare an oxidically and thermal resistant layer was performed on the samples from clear aluminium (99,99+ %, VÚK čisté kovy, s. r. o.) and on the samples from clear titanium (99,95 % Goodfellow) with a layer from sputtered aluminium (99,99 %, VÚK čisté kovy, s. r. o.), An oxidic layer was prepared on the samples by anodization in the oxalic acid. The layer had fine, hexagonally organized pores with the diameter of 30 nm. During the following processing was the structure prepared for the electrochemical deposition of copper to the pores. The aim of the electrodeposition was preparation of copper nanowires deposited into the pores of the oxidic layer. The process was performed in the solution of copper sulfate and sulfuric acid in water. The controlling parameter of the deposition was voltage which had a very asymmetric period. The period had to be optimized for a successful preparation of the wires. The result of the whole process was structure with oxidic matrix whose most of the pores were filled with copper.
Description
Citation
ŠŤASTNÁ, E. Elektrochemické metody přípravy kovokeramických oxidačně odolných vrstev [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2016.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Materiálové inženýrství
Comittee
prof. Ing. Jiří Švejcar, CSc. (předseda) prof. Ing. Ivo Dlouhý, CSc. (místopředseda) prof. Ing. Rudolf Foret, CSc. (člen) prof. Ing. Vlastimil Vodárek, CSc. (člen) prof. RNDr. Karel Maca, Dr. (člen) Ing. Zdeněk Chlup, Ph.D. (člen)
Date of acceptance
2016-06-14
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení
DOI
Collections
Citace PRO