Parcourir Ústav chemie materiálů par date de publication
Voici les éléments 1-20 de 65
-
Stability of collagen scaffold implants for animals with iatrogenic articular cartilage defoects
(University of Veterinary and Pharmaceutical Sciences in Brno, 2009-12-15)Synthesis and characterization of biodegradable hydrogels based on collagen modified by addition of synthetic biodegradable copolymer intended for preparation of porous scaffolds for mesenchymal stem cells used for possible ... -
Healing of Large Segmental Bone Defect after Implantation of Autogenous Cancellous Bone Graft in Comparison to Hydroxyapatite and 0.5% Collagen Scaffold Combined with Mesenchymal Stem Cells
(University of Veterinary and Pharmaceutical Sciences in Brno, 2010-04-06)At present, attention is focused on research into possibilities of healing large bone defects by the method of mini-invasive osteosynthesis, using implantation of biomaterials and mesenchymal stem cells (MSCs). This study ... -
Preparation, characterization and in vitro bioactivity of polyvinyl alcohol-hydroxyapatite biphasique membranes
(Slovak University of Technology in Bratislava, 2013-05-22)Paper focused on preparation, characterisation of polyvinyl alcohol-hydroxyapatite membranes with various content of hydroxyapatite filler in polyvinyl alcohol matrix and hydroxyapatite amount influence on composite in ... -
Nondestructive testing of advanced materials using sensors with metamaterials
(IOP Publishing, 2016-01-01)This work presents a method for nondestructive evaluation (NDE) of advanced materials that makes use of the images in near field and the concentration of flux using the phenomenon of spatial resolution. The method allows ... -
Soluble collagen dissolution and assembling in pressurized carbon dioxide water solutions
(Budapest University of Technology, 2018-02-01)Dissolution and gelation procedures have a great influence on gelation time, microstructure and mechanical properties of reconstituted collagen products. We have investigated the dissolution of atelocollagen in CO2/water ... -
Characterization of Electroless Ni–P Coating Prepared on a Wrought ZE10 Magnesium Alloy
(MDPI, 2018-03-07)Electroless low-phosphorus Ni–P coating was deposited on a wrought ZE10 magnesium alloy including an advanced pre-treatment of the material surface before deposition. Uniform Ni–P coating with an average thickness of 10 ... -
Potential use of blast furnace slag for filtration membranes preparation: A pilot study
(IOP Publishing, 2018-07-12)This paper investigates the possibilities of the use of sodium hydroxide activated blast furnace slag for preparation of filtration barriers. The motivation for this research is searching for cheaper and more eco-friendly ... -
Further Progress in Functional Interlayers with Controlled Mechanical Properties Designed for Glass Fiber/Polyester Composites
(MDPI, 2018-08-16)Compatible interlayers must be coated on reinforcing fibers to ensure effective stress transfer from the polymer matrix to the fiber in high-performance polymer composites. The mechanical properties of the interlayer, and ... -
Protective Properties of a Microstructure Composed of Barrier Nanostructured Organics and SiOx Layers Deposited on a Polymer Matrix
(MDPI, 2018-08-31)The SiOx barrier nanocoatings have been prepared on selected polymer matrices to increase their resistance against permeation of toxic substances. The aim has been to find out whether the method of vacuum plasma deposition ... -
Effect of Selected Commercial Plasticizers on Mechanical, Thermal, and Morphological Properties of Poly(3-hydroxybutyrate)/ Poly(lactic acid)/Plasticizer Biodegradable Blends for Three-Dimensional (3D) Print
(MDPI, 2018-10-03)This paper explores the influence of selected commercial plasticizers structure, which are based on esters of citric acid, on mechanical and thermal properties of Poly(3-hydroxybutyrate)/Poly(lactic acid)/Plasticizer ... -
The Effect of the Thermosensitive Biodegradable PLGA–PEG–PLGA Copolymer on the Rheological, Structural and Mechanical Properties of Thixotropic Self-Hardening Tricalcium Phosphate Cement
(MDPI, 2019-01-17)The current limitations of calcium phosphate cements (CPCs) used in the field of bone regeneration consist of their brittleness, low injectability, disintegration in body fluids and low biodegradability. Moreover, no method ... -
Optical Properties of Oxidized Plasma-Polymerized Organosilicones and Their Correlation with Mechanical and Chemical Parameters
(MDPI, 2019-02-12)Čistý tetravinylsilan a jeho směsi s kyslíkem byly použity k depozici oxidovaných plazmových polymerních filmů při různém efektivním výkonu (0,1-10 W) a různých kyslíkových frakcích (0-0,71) za použití RF pulzní plazmy. ... -
Plasma nanocoatings developed to control the shear strength of polymer composites
(MDPI, 2019-07-15)All reinforcements for polymer-matrix composites must be coated with a suitable material in the form of thin film to improve compatibility and interfacial adhesion between the reinforcement and the polymer matrix. In this ... -
Stabilization of the ammonia in SNCR fly ash - the influence of tannins presence on the preparation of an autoclaved aerated concrete
(IOP Publishing, 2019-08-14)Thanks to the legislative regulations on NOx emissions, a selective non-catalytic reduction (SNCR) technology had been introduced to a coal combustion process in power plants. The valuable by-product, fly ash, contains ... -
Effect of curing environment on length changes of alkali-activated slag/cement kiln by-pass dust mixtures
(IOP Publishing, 2019-08-14)This paper investigates the combination of commonly used blast furnace slag (BFS) and quite non-traditional cement kiln by-pass dust (BD) for the preparation of alkali-activated binder. More specifically, the possibilities ... -
Application of Isothermal and Isoperibolic Calorimetry to Assess the Effect of Zinc on Hydration of Cement Blended with Slag.
(MDPI, 2019-09-10)This work deals with the influence of zinc on cement hydration. The amount of zinc in cement has increased over recent years. This is mainly due to the utilization of solid waste and tires, which are widely used as a fuel ... -
Impact of sonochemical synthesis condition on the structural and physical properties of MnFe2O4 spinel ferrite nanoparticles
(ELSEVIER, 2020-03-01)Herein, we report sonochemical synthesis of MnFe2O4 spinel ferrite nanoparticles using UZ SONOPULS HD 2070 Ultrasonic homogenizer (frequency: 20 kHz and power: 70 W). The sonication time and percentage amplitude of ultrasonic ... -
Effect of Porosity Gradient on Mechanical Properties of Cellular Nano-Composites
(MDPI, 2020-03-01)With their hierarchical architectures incorporating gradients in composition, porosity, and orientation, natural materials have evolved optimized balance of mechanical properties. Deciphered from the structure of bamboo, ... -
Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand
(EDP Sciences, 2020-03-05)This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. ... -
Influence of alkali-activated materials placement during curing on their dynamic parameters
(EDP Sciences, 2020-04-16)The production of Portland cement has a considerable environmental impact. Its replacement with alkali-activated binders can contribute to reducing the environmental burden of building production. The paper presents partial ...