Browsing Ústav chemie materiálů by Title
Now showing items 28-47 of 65
-
Healing of Large Segmental Bone Defect after Implantation of Autogenous Cancellous Bone Graft in Comparison to Hydroxyapatite and 0.5% Collagen Scaffold Combined with Mesenchymal Stem Cells
(University of Veterinary and Pharmaceutical Sciences in Brno, 2010-04-06)At present, attention is focused on research into possibilities of healing large bone defects by the method of mini-invasive osteosynthesis, using implantation of biomaterials and mesenchymal stem cells (MSCs). This study ... -
High-Performance, Lightweight, and Flexible Thermoplastic Polyurethane Nanocomposites with Zn2+ substituted CoFe2O4 Nanoparticles and Reduced Graphene Oxide as Shielding Material against Electromagnetic Pollution
(ACS Publications, 2021-10-11)The development of flexible, lightweight, and thin high-performance electromagnetic interference shielding materials is urgently needed for the protection of humans, the environment, and electronic devices against ... -
Impact of sonochemical synthesis condition on the structural and physical properties of MnFe2O4 spinel ferrite nanoparticles
(ELSEVIER, 2020-03-01)Herein, we report sonochemical synthesis of MnFe2O4 spinel ferrite nanoparticles using UZ SONOPULS HD 2070 Ultrasonic homogenizer (frequency: 20 kHz and power: 70 W). The sonication time and percentage amplitude of ultrasonic ... -
Improving the corrosion resistance of AZ31 magnesium alloy by preparing hydroxyapatite with a superhydrophobized surface
(Tanger, 2022-02-23)Magnesium and its alloys are promising materials that have potential mainly in the field of transport (e.g. automobile industry) and medicine (e.g. orthopedic implants). Their disadvantage is poor corrosion resistance, ... -
In-situ self-assembly of silica nanoparticles into microfibers with potential to reinforce polymers
(Tanger, 2020-10-01)Silica nanosphere with a diameter of 10–15 nm were organized into fibers with a lenght of 15 mm and an aspect ratio of 100 by self-assembly in 1,4-dioxane. Dioxane causes a positive zeta potential on the silica surface ... -
Influence of alkali-activated materials placement during curing on their dynamic parameters
(EDP Sciences, 2020-04-16)The production of Portland cement has a considerable environmental impact. Its replacement with alkali-activated binders can contribute to reducing the environmental burden of building production. The paper presents partial ... -
The influence of alkaline activator on immmoblization of metals in alkali-activated blast furnace slag
(IOP Publishing, 2020-06-03)In this work the influence of alkaline activator on immobilization of lead and copper in alkali-activated blast furnace slag was investigated. A total of five alkali activators were used; sodium waterglass, potassium ... -
Introducing the Newly Isolated BacteriumAneurinibacillussp. H1 as an Auspicious Thermophilic Producer of Various Polyhydroxyalkanoates (PHA) Copolymers-1. Isolation and Characterization of the Bacterium
(MDPI, 2020-05-29)Extremophilic microorganisms are considered being very promising candidates for biotechnological production of various products including polyhydroxyalkanoates (PHA). The aim of this work was to evaluate the PHA production ... -
Introducing the Newly Isolated BacteriumAneurinibacillussp. H1 as an Auspicious Thermophilic Producer of Various Polyhydroxyalkanoates (PHA) Copolymers-2. Material Study on the Produced Copolymers
(MDPI, 2020-06-05)Aneurinibacillussp. H1 is a promising, moderately thermophilic, novel Gram-positive bacterium capable of the biosynthesis of polyhydroxyalkanoates (PHA) with tunable monomer composition. In particular, the strain is able ... -
Lumbar Interbody Fusion Conducted on a Porcine Model with a Bioresorbable Ceramic/Biopolymer Hybrid Implant Enriched with Hyperstable Fibroblast Growth Factor 2
(MDPI, 2021-06-25)An experimental animal study was designed to investigate the intervertebral fusion efficiency and safety of a bioresorbable ceramic/biopolymer hybrid implant enriched with FGF2-STAB(R) in comparison with a tricortical bone ... -
Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand
(EDP Sciences, 2020-03-05)This paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. ... -
Negative effect of Zinc compounds on hydration kinetics of ordinary Portland cement
(IOP Publishing, 2021-01-18)Heavy metals have significant effect on cement hydration mechanism and kinetics. The recycling of waste materials leads to increase of content of heavy metals in various industrial products and visibly affects properties ... -
Nondestructive testing of advanced materials using sensors with metamaterials
(IOP Publishing, 2016-01-01)This work presents a method for nondestructive evaluation (NDE) of advanced materials that makes use of the images in near field and the concentration of flux using the phenomenon of spatial resolution. The method allows ... -
Optical Properties of Oxidized Plasma-Polymerized Organosilicones and Their Correlation with Mechanical and Chemical Parameters
(MDPI, 2019-02-12)Čistý tetravinylsilan a jeho směsi s kyslíkem byly použity k depozici oxidovaných plazmových polymerních filmů při různém efektivním výkonu (0,1-10 W) a různých kyslíkových frakcích (0-0,71) za použití RF pulzní plazmy. ... -
Optimization of cementitious composite for heavyweight concrete preparation using conduction calorimetry
(Springer, 2020-09-17)The present work investigates the hydration heat of different cement composites by means of conduction calorimetry to optimize the composition of binder in the design of heavyweight concrete as biological shielding. For ... -
PEO of AZ31 Mg Alloy: Effect of Electrolyte Phosphate Content and Current Density
(MDPI, 2020-12-17)In this work, the quality of coatings prepared by plasma electrolytic oxidation (PEO) on an AZ31 magnesium alloy were evaluated. This was done by studying the effects of the chemical composition of phosphate-based process ... -
Phase Composition of Silica Fume-Portland Cement Systems Formed under Hydrothermal Curing Evaluated by FTIR, XRD, and TGA
(MDPI, 2021-05-24)Two substitution levels of Portland cement by silica fume (SF; 30 and 50 mass%) and three hydrothermal treatment regimes (0.5, 1.2, and 2 MPa and 165, 195, and 220 degrees C for 7 days, respectively) were selected for the ... -
PLA toughening via bamboo-inspired 3D printed structural design
(Elsevier, 2021-12-01)Bioinspired structures can attain mechanical properties unseen in conventional artificial materials. Specifically, the introduction of a cellular structure with a precisely designed distribution of cells, cell sizes, and ... -
Plasma nanocoatings developed to control the shear strength of polymer composites
(MDPI, 2019-07-15)All reinforcements for polymer-matrix composites must be coated with a suitable material in the form of thin film to improve compatibility and interfacial adhesion between the reinforcement and the polymer matrix. In this ... -
Potential use of blast furnace slag for filtration membranes preparation: A pilot study
(IOP Publishing, 2018-07-12)This paper investigates the possibilities of the use of sodium hydroxide activated blast furnace slag for preparation of filtration barriers. The motivation for this research is searching for cheaper and more eco-friendly ...