• A Comparison of Edge-Based and Region-Based Segmentation Performed with PDEs 

    Sliž, Jiří (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The paper discusses the level set segmentation method, which employs the solution of the partial differential equation (PDE) describing the multidimensional function whose zero slice in plane xy determines the contour of ...
  • System for MEMS Gyroscope Testing 

    Hasík, Stanislav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper presents fundamental information about an apparatus for tests on MEMS gyroscopes. Within the introductory section, the measurement system used to test MEMS gyroscopes at a Honeywell laboratory is characterized; ...
  • Ultra Low Power Tunable Transconductor 

    Dabbous, Salma Bay Abo (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper presents ultra-Low power (ultra-LP) Low voltage (LV) tunable transconductor (Gm) and its application to implement Gm-C filter. The CMOS structure of the Gm is performed using bulk-driven (BD) MOST technique, ...
  • Epoxy Resin with Aaluminium Oxide Nanofiller and its Dielectric Properties 

    Lontrasová, Aneta (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    Topic of this paper is dielectric properties of epoxy resins, containing nanoparticles of Al2O3. Dielectric spectroscopy was used during epoxy nanocomposite diagnostics. These new materials are candidates for use in ...
  • Alignment-free Visualization of Metagenomic Data by Genomic Signal Processing 

    Kupková, Kristýna (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    Alignment-free visualization of metagenomic data without prior knowledge about organism composition is one of the major issues in metagenomic bioinformatics. Such a visualization method must place fragments from one organism ...
  • Rotor Slot Optimization of an Induction Motor 

    Szekeres, Vojtech (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    Proposed paper is dealing with optimization of an induction machine rotor slot by using artificial intelligence. Electrical machine under investigation is commonly manufactured induction motor with simple deep rotor bars. ...
  • Numerical Analysis of the Lightning on Small Aircraft 

    Krutílek, David (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with numerical analysis of lightning stroke effects on aircraft. Computations are implemented by the use of the time-domain solver (FIT). Attention is turned to a simple model of a composite nose part of ...
  • Normalized Inter-class Variance (NICV) 

    Vaněk, Stanislav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The internet of things leads to a massive interest in security of embedded devices. Nowadays, power analysis poses extremely effective and successful types of attacks to break confidential cryptographic algorithms such as ...
  • Quantification of Prosodic Impairment in Patients with Idiopathic Parkinson's Disease 

    Galáž, Zoltán (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with quantitative analysis of prosodic impairment in idiopathic Parkinson’s disease (PD). Experimental dataset consisted of 97 PD patients and 55 healthy speakers. The prosodic features expressing monopitch, ...
  • Comparative Analysis of Common and Unique Targets in Drug Resistant Strain of Borrelia Burgdorferi 

    Koščová, Pavlína (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The number of drug-resistant strains of Borrelia burgdorferi necessitated the identification of potential drug targets specific to the strain of interest. The chromosomal and plasmid genes of B. burgdorferi strain B31 were ...
  • Active Contours Initialization for Cell Tracking in the Images from Holographic Microscope 

    Vičar, Tomáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper describes the implementation of the segmentation method applied on images from holographic microscope. The method combines tresholding and active contour model. This segmentation method can be used on the first ...
  • Remote Control for Steam Engines Models 

    Benda, David (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The aim of this project is to create a remote control for radio controlled model of steamboat. The entire device consists of two parts - a transmitter and receiver. Data transmission modules were selected from the company ...
  • Three-Phase Inverter for High Speed Induction Motor 

    Veselý, Petr (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This work deals with designing a power part of a three-phase inverter for induction motor. It contains choosing of some important parts such as IGBT modules or drivers, which depends on parameters, that are mentioned or ...
  • Reactive Magnetron Sputtering of the Aluminium Oxide Coating 

    Dušek, Jan (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This contribution deals with design, check and test of deposition parameters for new installed aluminium target. In addition of individual parts of deposition process and hysteresis of sputtering thin films of Al2O3 was ...
  • High Precision Reference Position Generator for Motor Control in FPGA 

    Dvořák, Vojtěch (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The paper deals with an architecture of a high precision reference position generator for a motor controller implemented in FPGA. The architecture was developed to achieve high accuracy and tunability with concern to ...
  • Network Interface for Microblaze 

    Janík, Lukáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This article deals with interfacing of Xilinx MicroBlaze (UB) softcore microprocessor to 1 Gb/s Ethernet data bus via custom simple Ethernet switch. This interface is implemented on an FPGA board and serves as the lower ...
  • The Simulation of Effect of MR Pulse Sequences on the Measurement Object Temperature 

    Kosková, Markéta (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with a heating tissues problem of the measured object in magnetic resonance. This is the consequence of using MRI pulse sequences. At the beginning of this paper is introduction to this topic and the ways ...
  • Comparison of the Methods Used to Low Level DC Voltage Measurement 

    Obšilová, Lucie (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with comparison of three methods used to measure low level DC voltage. It is about Reference Step Method, potentiometric method and direct method. Measurement was held in cooperation with the Czech metrology ...
  • Supercapacitor Parameters Dependence on Charging Duration 

    Kuparowitz, Tomáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    Supercapacitor (SC) parameters dependence on charging time is analyzed for Nesscap 2.7V / 10F. Charging was performed using constant current in the range from 0.5 A to 5 A. Reciprocal capacitance (C-1) was calculated. It ...
  • Distributed Framework for Testing Machine Learning Methods 

    Klusáček, Jan (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    When designing new Machine learning (ML) methods, solid testing is very important part of process. This article describes a framework that was created for automated testing and comparison of different ML methods. This ...