Now showing items 1-20 of 174

  • 3D Controller 

    Hrubý, Lukáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The following arctilce deals with problems of scanning of device position in space, processing of collected data about its position and sending these data to end device. In scope of this work will be created controller ...
  • Accelerated Hyperbolic Nilt Method Used For Frequency–Dependent Transmission Linesimulation 

    R–Smith, Nawfal Al–Zubaidi (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    In this paper a proposed hyperbolic numerical inverse Laplace transform method is presented and utilized to simulate waves along a frequency dependent lossy transmission line. The method is accelerated via the quotient–difference ...
  • Acquisition And Classification Of Motion 

    Tichá, Petra (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This article deals with the acquisition and classification of human movement using accelerometer and gyroscope data. First part of the work summarizes the design and implementation of the acquisition system and its placement ...
  • The Acquisition System For Electrogram Re-Cording 

    Fajmon, František (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This article deals with ECG acquisitions and analysis for laboratory studies. Proposed algoritmhs are realized in Matlab and Arduino workspace. Output this project is device for acquisitions ecg from isolated rodent heart.
  • Alandering Of Li-Ion Electrodes And Its Im-Pact On The Final Capacity Of Lithium-Ion Cell 

    Svoboda, Lukáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    There is an effort to produce lithium-ion batteries with maximal density of energy, or higher capacity of cell with the same size. Calendaring of electrodes is important part of manufacturing of batteries. Its parameters, ...
  • Analysis Of Broken Rotor Bars Fault In Inverter Fed Induction Motor By Means Of Motor Current Signature Analysis And Stray Flux Of Motor 

    Chernyavska, Ielyzaveta (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    In this paper the analysis of effect of broken rotor bar fault in squirrel-cage induction motor fed by frequency converter is presented. The motor current signature analysis as well as stray flux of motor were used in order ...
  • The Analysis Of Ceramic Resistor Arrays In Smt 

    Novotný, Václav; Vala, Radek (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This paper is focused on the area of current electrical manufactory in conjunction with possibilities of computer analysis and monitoring psychical phenomena by computing systems. There are also described processes of ...
  • Analysis Of Main Otu Picking Methods By Bipartite Graphs 

    Šafárová, Marcela (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    Studies of ecosystems containing millions of microbial organisms, so called microbiomes, using DNA sequencing became very popular. The main step involves fast clustering of sequences belonging to the same operational ...
  • Analysis Of The Operation Of The Lattice Network Brno - Stred 

    Frechova, Lucie (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The paper focuses on the measured data analysis of the lattice network in Brno-stred. Therefore, it evaluates the network behaviour and it brings the comparison of theoretical and real data and normal and fault operation ...
  • Anti-Windup Methods For Linear Dynamic Systems 

    Kozubík, Michal (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The aim of this work is to introduce integrator windup and methods of its compensation. Presented methods are Internal Model Control(IMC) and design based on solving linear matrix inequalities (LMI).
  • Application Of Fpga In Multilevel Inverters 

    Repčík, Juraj (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    In this paper, a single-phase five-level Active Neutral-Point Clamped inverter design is presented. The paper is focusing chiefly on control hardware and control strategy for 5-level PWM with active balancing of the charge ...
  • Application Of Mini Display For Data Projectionin User Electronics 

    Veverka, David (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This paper deals with application of a very small display in user specific equipment for projecting data collected at a source machine. The transmission of the data is realized using Bluetooth Low Energy wireless modules. ...
  • Arterialwall Nonlinear Features Identification By Vibrational Photoplethysmography Technique 

    Nejedlý, Petr (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The presented paper describes a mathematical model for estimation of an arterial compliance by vibrational photoplethysmography technique. The first section of the article describes non-linear viscoelastic properties of ...
  • Automated Detection Of Retinal Venous Pulsations From Video Sequences 

    Hracho, Michal (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The aim of this paper is to propose a method of automated detection and parametrization of spontaneous venous pulsations, that can occur in patients with various degrees of glaucoma. The method uses uncompressed video ...
  • Automatic DC Motor Stop Detection 

    Arm, Jakub (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    In this article, the automatic motor stop because of a mechanical obstacle or the end limit is described and implemented. Theory about the motor current parameters evaluation and the motor current measurements is presented. ...
  • Automatic Defect Detection Of Printed Circuit Board 

    Horák, Martin (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    Visual inspection of the printed circuit boards (PCB’s) by human controllers is becoming impossible with the increasing complexity and miniaturization of the circuit boards. To achieve high reliability of the PCB’s ...
  • Automatic Segmentation And Classification Of Internal Calibration Tissues 

    Šalplachta, Jakub (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The aim of this work is finding a way to make calculation of bone mineral density of vertebrae with the use of internal calibration tissues fully automatic procedure. To accomplish that several methods for segmentation and ...
  • The Automatic Self Tuning System For Seven-String Guitars 

    Jeřábek, Vojtěch (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    The project deals with a design and a realization of the automatic self-tuning system for the seven-string guitars. There is a description of some solutions for the six-string guitars. There is also an evaluation of the ...
  • Autonomous Charging Stations For Drones 

    Janoušek, Jiří (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This article deals with autonomous charging station for drones. In the first one, the term "charging station" is analyzed in the context of its applicability. Then, section characterizes the process of charging and description ...
  • Beamforming Circuits For L-Band Antenna 

    Kalina, Ladislav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2017)
    This project describes the design of beamforming circuits for L-band antenna. The first part contains designed concept of a phase shifter. Other part consists block scheme of the phase shifter with real components and ...