Now showing items 1-20 of 174

  • 3D-Printed Lens For High Directional Low-Profile Antenna 

    Zechmeister, Jaroslav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This contribution focuses on 3D-printed lenses for a high directional low-profile antenna for 77 GHz. Two 3D-printing technologies and two different materials are used for the lens fabrication. A dielectric constant and a ...
  • Active And Reactive Energy Flows Analysis Of 110/22 Kv Transformation Points 

    Pololanik, Pavel (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    The paper contains description of two extensive areas of the distribution network. It also presents differences in comparison of overhead lines and cable lines or indicates influence of RES on energy flow. Therefore there ...
  • Active Protection And Monitoring Device For Wireless Chargers 

    Volek, Radim (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This thesis deals with the design of monitoring device, which should serve for measurement and recording measured values of wireless charging device. The thesis further solves design of device protection method. Measuring ...
  • Adaptive Routing Of Industrial Robot Traces 

    Sýkora, Tomáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This paper deals with software of transport entities used in testbed Industry 4.0. The first part describes the concept of testbed and traditional way of programing industrial robots. The second part deals with the description ...
  • Advanced Structural Analysis Of Silicon Solar Cells 

    Papež, Nikola (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    The study investigates the structural imperfections of photovoltaic cells based on polycrystalline silicon. Experimental characterization focuses in particular on the degradation and defects analysis. Two modern techniques ...
  • Analysis Of Passive Heat Removal Systém Trough Steam Generator By Ansoft Fluent 

    Petrosyan, Taron (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This paper presents the simulation of the condensation of water vapor in one tube of the heat exchanger in the Passive Heat Removal System, which is a protective safety system of the Nuclear Power Plant. The simulation ...
  • Analysis Of The System Power Station Restoration Paths In Modes And Pscad Sw 

    Peterka, Michal (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    The paper presents the restoration path for system power station Dlouhé Stráně (EDST) and Chvaletice (ECHV) and it also makes the parameteres description of its equivalent model in MODES and PSCAD software. Furtheremore, ...
  • Application Of Nmpc For Pmsm Drive Control 

    Kozubík, Michal (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This paper deals with the application of nonlinear model predictive control for permanent magnet synchronous motor drive control. The proposed algorithm is compared with well-known field oriented control with the focus on ...
  • Articulated Vehicle Kinematics 

    Roman, Matej (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    The goal of this paper, is to create an articulated vehicle kinematics model in the Matlab Simulink program, to find equations of state of this system and implement them in the Simulink environment, and to simulate and ...
  • Augmentation Technique For Artificial Phase-Contrast Microscopy Images Generation For The Training Of Deep Learning Algorithms 

    Mívalt, Filip (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    Phase contrast segmentation is crucial for various biological tasks such us quantitative, comparative or single cell level analysis. The popularity of image segmentation using deep learning strategies has been transferred ...
  • Augmented Reality System For Testbed Industry 40 

    Poláček, Matěj (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This article deals with integration of augmented reality (AR) into Testbed Industry 4.0. Testbed is automated robotic barman intended for practical demonstration and verification of concepts such as Industry 4.0 or a digital ...
  • Automated Aeroponics System 

    Šimek, Martin (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This thesis is focused on aeroponic system problems and automation. One of the main features of the system is automatic regulation of pH and EC of the nutrient solution which will be achieved by dispensing fertilizers and ...
  • Automatic Leveling And Loading Platform For Autonomous Production Line 

    Baštán, Ondřej (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    The following text aims to familiarize readers with the basic concepts and construction solutions of an autonomous production line using additive production to serve as a data source for research and development of industrial ...
  • Automatic Quality Assurance Of Software For Embedded Devices 

    Pernikář, Aleš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This article concerns automation of software and hardware testing using the robotic testing system called RQA. It describes a design of an interface producing test scenarios using the robotic testing system. Next it ...
  • Automatic Stress Detection Using Non-Eeg Biological Signal 

    Malina, Ondřej (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This work deals with the issue of stress detection using non-EEG biosignals. The main goal of this work is to create a functional program in MATLAB programming language that would allow detection and classification of ...
  • Autonomous Cell “Sodamaker“ For Industry 40 Testbed 

    Dvorský, Petr (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    The topics of this article is the design and realization of an autonomous cell for soda production for the testbed of Industry 4.0. Basic construction principles of the autonomous cell are described here. Also the mechanical ...
  • Band-Limited Signal Extrapolation Using Least Squares Approximation By Prolate Spheroidalwave Functions 

    Mihálik, Ondrej (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This paper is concerned with the band-limited signal extrapolation using a truncated series of Prolate spheroidal wave functions. Our aim is to investigate the extent to which it is possible to extrapolate signal from its ...
  • Benchmarks With Points On Elliptic Curves 

    Brychta, Josef (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    This paper deals with benchmarks of generating random points and arithmetic operations with points on elliptic curves. These benchmarks were implemented on the hardware platforms Raspberry Pi Zero/1/2/3. The primary goal ...
  • Big Data Analytics In The Context Of Mobile Network Performance Optimization 

    Klus, Roman (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    Crowdsourcing is a modern and growing technique of acquiring large amount of information. This project utilizes the data on mobile connectivity gathered by RTR NetzTest application to evaluate the performance indicators ...
  • Body Surface Potential Mapping In Animal Experiments - Pilot Study 

    Novotna, Petra (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2019)
    The aim of this article is to present a pilot case study in the area of body surface potential mapping. This technology was used to record data from animal experiments with the goal to find out, what information could be ...