Now showing items 1177-1196 of 1981

  • Modelling Transmission Lines for the Purpose of Data Transmission over Power Lines 

    Franek, Lešek; Šťastný, Ladislav; Bradáč, Zdeněk (Elsevier, 2015-03-26)
    The aim of the article is to create two models of power line communication. First model is called Multipath model and It is based on identifying the transfer function based on the measured values. Second model is called ...
  • Modelování dýchacích cest jako nástroj pro účinnější inhalační léčbu 

    Lízal, František (2019-09-04)
    Obsah přednášky 1. Inženýrský přístup – teorie 2. Konkrétní aplikace – mechanismy usazování částic v plicích 3. Brněnský model plic – experimenty a počítačové modelování 4. Jak funguje počítačové modelování 5. Inhalovaný ...
  • Modelování Phillipsovy křivky s podporou systému Maple 

    Novotná, Veronika; Luhan, Jan (Česká společnost pro systémovou integraci, 2012-05-02)
    Tato práce představuje možnosti, které nabízí software Maple při řešení ekonomického modelu pomocí diferenciálních rovnic. Článek se zabývá modelem, který vyjadřuje vztah mezi mírou inflace a mírou nezaměstnanosti a který ...
  • Modelování tepelného sálání v budovách 

    Plášek, Josef; Šikula, Ondřej (VUT v Brně, 2012-03-03)
    Tato kniha je zaměřena na problematiku tvorby sálavé složky vnitřního prostředí budov. Popisuje fyzikální podstatu sdílení tepla sáláním, jeho působení na člověka, klasické metody návrhu tepelných zářičů a shrnuje stávající ...
  • Modern Micro and Nanoparticle-Based Imaging Techniques 

    Vaculovičová, Markéta; Pekárková, Jana; Drbohlavová, Jana; Kopel, Pavel; Babula, Petr; Hynek, David; Adam, Vojtěch; Eckschlager, Tomáš; Hubálek, Jaromír; Stiborová, Marie; Kaiser, Jozef; Kizek, René (MDPI, 2012-11-02)
    The requirements for early diagnostics as well as effective treatment of insidious diseases such as cancer constantly increase the pressure on development of efficient and reliable methods for targeted drug/gene delivery ...
  • MODERN TOOLS FOR VEHICLE DEVELOPMENT 

    Porteš, Petr; Kučera, Pavel; Píštěk, Václav; Fojtášek, Jan; Zháňal, Lubor (Brno University of Technology, 2017-05-15)
    The development of vehicles is constantly advancing, therefore, it is required to have more sophisticated tools for the development of a complete vehicle or its individual parts. This article describes modern tools used ...
  • Modification of electrothermal atomic absorption spectrometry for determination of arsenic in high salinity samples 

    Smolíková, Vendula; Pelcová, Pavlína; Hedbávný, Josef; Zlámalová, Lucie; Ridošková, Andrea (Mendel University in Brno, 2019-01-02)
    The electrothermal atomic absorption spectrometry (ET-AAS) method was optimized for determination of the arsenic content in high salinity samples. The combination of palladium (1 g/l) modifier, graphite furnace temperature ...
  • Modification of Plasma Sprayed TiO2 Coatings Characteristics via Controlling the In-flight Temperature and Velocity of the Powder Particles 

    Čížek, Jan; Dlouhý, Ivo; Šiška, Filip; Khor, Khiam Aik (Springer, 2014-08-27)
    The study presents a comprehensive research on the plasma spray fabrication of TiO2 coatings with microstructural properties adjustable via controlling the respective in-flight properties of the feedstock particles. The ...
  • Modification of working electrode surface with carbon nanotubes as an electrochemical sensor for estimation of melting points of DNA 

    Hubálek, Jaromír; Prášek, Jan; Húska, Dalibor; Adámek, Martin; Adam, Vojtěch; Trnková, Libuše; Kizek, René (Elsevier BV, 2009-09-06)
    Screen-printed with three electrode system was used in this study. A working electrode has been printed from carbon nanotubes based paste on silver layer modified with nano-patterned structures for the first case. In the ...
  • Modification of Zinc Selenium nanoparticles with fish oil and their effect on bacteria 

    Popelková, Vendula; Vymazalová, Pavla; Bytešníková, Zuzana; Kočiová, Silvia; Švec, Pavel; Neřádová, Veronika; Piechowiczová, Markéta; Šmerková, Kristýna; Komprda, Tomáš (Mendel University in Brno, 2019-12-31)
    The aim of this study was develop suitable nanomaterial modified by fish oil using microwave-assisted synthesis. Dietary omega-6 and omega-3 polyunsaturated fatty acids can influence an inflammatory process, as well as ...
  • Modified compact tension specimen for experiments on cement based materials: comparison of calibration curves from 2D and 3D numerical solutions 

    Seitl, Stanislav; Viszlay, Viliam (Gruppo Italiano Frattura, 2017-01-01)
    The evaluation of fracture mechanics parameters of materials has become very important part of considering the condition of older constructions as well as properties of newly developed materials. This contribution focuses ...
  • Modified GIANT Dynamic Bandwidth Allocation Algorithm of NG-PON 

    Horváth, Tomáš; Oujezský, Václav; Münster, Petr; Vojtěch, Josef; Havliš, Ondřej; Sikora, Pavel (Croatian Communications and Information Society, 2017-04-07)
    As NS-3 simulator does not support the direct mapping of Triple Play services into T-CONT and their labeling. We focus on a delay value for Triple Play services which was reduced by own modification in a GIANT algorithm. ...
  • Modulation of Induced Cytotoxicity of Doxorubicin by Using Apoferritin and Liposomal Cages 

    Gumulec, Jaromír; Fojtů, Michaela; Raudenská, Martina; Sztalmachová, Markéta; Skotáková, Anna; Vlachová, Jana; Skaličková, Sylvie; Nejdl, Lukáš; Kopel, Pavel; Knopfová, Lucia; Adam, Vojtěch; Kizek, René; Stiborová, Marie; Babula, Petr; Masařík, Michal (MDPI, 2014-12-01)
    Doxorubicin is an effective chemotherapeutic drug, however, its toxicity is a significant limitation in therapy. Encapsulation of doxorubicin inside liposomes or ferritin cages decreases cardiotoxicity while maintaining ...
  • Molecular imprinting technology for targeted analysis of proteins 

    Hutařová, Jitka; Vaněčková, Tereza; Vaculovičová, Markéta; Adam, Vojtěch (Mendel University in Brno, 2017-12-31)
    Molecular imprinting has appeared to be an effective technique for creating of selective recognition sites in synthetic polymers. This procedure comprises polymerization of monomer in a presence of target molecules (template). ...
  • Molecularly imprinted polymers coupled to mass spectrometric detection for metallothionein sensing 

    Vaněčková, Tereza; Pompeiano Vaníčková, Lucie; Tvrdoňová, Michaela; Pomorski, Adam; Krężel, Artur; Vaculovič, Tomáš; Kanický, Viktor; Vaculovičová, Markéta; Adam, Vojtěch (Elsevier, 2019-06-01)
    We report a facile method for detection of metallothionein (MT), a promising clinically relevant biomarker, in spiked plasma samples. This method, for the first time, integrates molecularly imprinted polymers as ...
  • MongoDB Database as Storage for GPON Frames 

    Holík, Martin; Horváth, Tomáš; Oujezský, Václav; Münster, Petr; Tomašov, Adrián; Valach, Soběslav (MDPI, 2020-10-30)
    This work is focused on creating an open-source software-based solution for monitoring traffic transmitted through gigabit passive optical network. In this case, the data are captured by the field-programmable gate array ...
  • Monitoring of concrete hydration by electrical measurement methods 

    Kusák, Ivo; Luňák, Miroslav; Chobola, Zdeněk (Elsevier, 2016-08-01)
    Analysis of impedance spectra of inhomogeneous materials is a part of the impedance spectroscopy which is still waiting for its development. Materials having higher electric resistance values (over 500 kohm) can be considered ...
  • Monitoring the long-term durability and microstructure of polymer concrete patching materials with high content of secondary raw materials using advanced methods 

    Hodul, Jakub; Mészárosová, Lenka; Drochytka, Rostislav (IOP Publishing, 2018-07-16)
    For commercially produced polymer systems, only primary raw materials are used as fillers. These fillers are predominantly pure silica sand of various grading. The substitution of primary materials with secondary raw ...
  • Monolithic frequency comb platform based on interband cascade lasers and detectors 

    Schwarz, Benedikt; Hillbrand, Johannes David; Beiser, Maximilian; Andrews, Aaron Maxwell; Strasser, Gottfried; Detz, Hermann; Schade, Anne; Weih, Robert; Höfling, Sven (The Optical Society, 2019-07-20)
    New insights into the laser dynamics of interband cascade lasers reveal the possibility to generate frequency-modulated combs by utilizing their inherent gain nonlinearity. The resulting comb state is characterized by ...
  • Monotonic and cyclic properties of TiAl alloys Monotic and cyclic properties of TiAl alloys doped with Nb, Mo and C 

    Chlupová, Alice; Obrtlík, Karel; Beran, Přemysl; Heczko, Milan; Polák, Jaroslav; Kruml, Tomáš (Elsevier, 2014-06-25)
    Six grades of TiAl alloys doped with 7 at.% Nb and variable content of C and/or Mo were studied. The as-received microstructure and phase composition of the alloys was characterized using neutron diffraction experiments ...