Show simple item record

dc.contributor.authorKorniejenko, Kingacs
dc.contributor.authorFigiela, Beatacs
dc.contributor.authorŠimonová, Hanacs
dc.contributor.authorKucharczyková, Barbaracs
dc.contributor.authorDuarte Guigou, Martincs
dc.contributor.authorLach, Michalcs
dc.date.accessioned2021-03-03T15:54:07Z
dc.date.available2021-03-03T15:54:07Z
dc.date.issued2020-10-14cs
dc.identifier.citationMATEC Web of Conferences. 2020, vol. 322, issue 1, p. 1-7.en
dc.identifier.issn2261-236Xcs
dc.identifier.other166305cs
dc.identifier.urihttp://hdl.handle.net/11012/196387
dc.description.abstractThis article aims to analyse the long-term influence of the pretreatment method on mechanical properties such as the compressive strength of geopolymer composites reinforced with short natural fibres (length of around 5 mm). This paper presents the behaviour of sodium activator-synthesised fly ash geopolymer containing natural fibres at ambient temperatures. Fly ash from the Skawina coal power plant (located in: Skawina, Lesser Poland, Poland) was used as a raw material. The chemical composition of the fly ash was typical for class F. The article evaluated the methods of pre-treatment of the fibres on the mechanical properties of the geopolymer composites. It compares the plain specimens and composites with fibres pre-treated in water and alkali solutions as well as with fibres without any pre-treatment. The fibres were added at the amount of 1% by weight. The investigation was made by visual analysis and the testing of mechanical properties (compressive and flexural strength at ambient temperature) after 6 months. The achieved results do not confirm the positive influence of the fibre pre-treatment on the mechanical properties of the composites.en
dc.formattextcs
dc.format.extent1-7cs
dc.format.mimetypeapplication/pdfcs
dc.language.isoencs
dc.publisherEDP Sciencescs
dc.relation.ispartofMATEC Web of Conferencescs
dc.relation.urihttps://www.matec-conferences.org/articles/matecconf/abs/2020/18/matecconf_matbud2020_01012/matecconf_matbud2020_01012.htmlcs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectfibreen
dc.subjectpre-treatmenten
dc.subjectgeopolymeren
dc.subjectstrengthen
dc.titleThe influence of fibre pre-treatment on the mechanical properties of the geopolymer compositesen
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavební mechanikycs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavebního zkušebnictvícs
sync.item.dbidVAV-166305en
sync.item.dbtypeVAVen
sync.item.insts2021.05.03 16:54:23en
sync.item.modts2021.05.03 16:14:51en
dc.coverage.issue1cs
dc.coverage.volume322cs
dc.identifier.doi10.1051/matecconf/202032201012cs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2261-236X/cs
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International