Show simple item record

dc.contributor.authorMalý, Milancs
dc.contributor.authorSapík, Marcelcs
dc.contributor.authorJedelský, Jancs
dc.contributor.authorJanáčková, Ladacs
dc.contributor.authorJícha, Miroslavcs
dc.contributor.authorSláma, Jaroslavcs
dc.contributor.authorWigley, Grahamcs
dc.date.accessioned2021-03-04T11:55:13Z
dc.date.available2021-03-04T11:55:13Z
dc.date.issued2018-06-04cs
dc.identifier.citationEPJ Web of Conferences. 2018, vol. 180, issue 02059 , p. 1-6.en
dc.identifier.issn2100-014Xcs
dc.identifier.other143870cs
dc.identifier.urihttp://hdl.handle.net/11012/196408
dc.description.abstractPressure-swirl atomizers are used in a wide range of industrial applications, e.g.: combustion, cooling, painting, food processing etc. Their spray characteristics are closely linked to the internal flow which predetermines the parameters of the liquid sheet formed at the discharge orifice. To achieve a better understanding of the spray formation process, the internal flow was characterised using Laser Doppler Anemometry (LDA) and high-speed imaging in a transparent model made of cast PMMA (Poly(methyl methacrylate)). The design of the transparent atomizer was derived from a pressure-swirl atomizer as used in a small gas turbine. Due to the small dimensions, it was manufactured in a scale of 10:1. It has modular concept and consists of three parts which were ground, polished and bolted together. The original kerosene-type jet A-1 fuel had to be replaced due to the necessity of a refractive index match. The new working liquid should also be colourless, non-aggressive to the PMMA and have the appropriate viscosity to achieve the same Reynolds number as in the original atomizer. Several liquids were chosen and tested to satisfy these requirements. P-Cymene was chosen as the suitable working liquid. The internal flow characteristics were consequently examined by LDA and high-speed camera using p-Cymene and Kerosene-type jet A-1 in comparative manner.en
dc.formattextcs
dc.format.extent1-6cs
dc.format.mimetypeapplication/pdfcs
dc.language.isoencs
dc.publisherTechnical University Libereccs
dc.relation.ispartofEPJ Web of Conferencescs
dc.relation.urihttps://doi.org/10.1051/epjconf/201818002059cs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectPressure-swirlen
dc.subjectinternal flowen
dc.subjectLaser Doppler Anemometryen
dc.subjectHigh-speed cameraen
dc.titleInternal flow characteristics in scaled pressure-swirl atomizeren
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. EÚ-odbor termomechaniky a techniky prostředícs
sync.item.dbidVAV-143870en
sync.item.dbtypeVAVen
sync.item.insts2021.03.04 12:55:13en
sync.item.modts2021.03.04 12:14:26en
dc.coverage.issue02059cs
dc.coverage.volume180cs
dc.identifier.doi10.1051/epjconf/201818002059cs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2100-014X/cs
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Creative Commons Attribution 4.0 International
Except where otherwise noted, this item's license is described as Creative Commons Attribution 4.0 International