• Fabrication of nanostructured TiO2 surfaces for photocatalytic applications 

    Přikrylová, K. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This paper presents titanium dioxide nanostructured surfaces prepared in organic electrolytes containing ammonium fluoride by anodic oxidation method. Two approaches were used for fabrication, one-step and two-step ...
  • Technological aspects of rework 

    Řihák, P. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    The paper deals with the technological aspects of rework. There are introduced some of these aspects as ambient temperature and ambient humidity, handling and storing devices and components, operators work, reflow soldering ...
  • Detection of defect on FBGA solder balls using X-ray technology 

    Řihák, P. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    The paper deals with the detection of defects using X-ray technology. It is focused on a particular type of X-ray machine, which is used for most of these experiments. X-ray cabinet is commonly used for analyzes of defects, ...
  • Synthesis of core/shell quantum dots for diagnostic 

    Mihajlovic, A. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    In this paper, synthesis of colloidal core and core/shell quantum dots (QDs) was described. First, CdTe QDs capped with glutathione, thioglycolic or mercaptopropionic acid were prepared in aqueous phase, and used for ...
  • Analysis and Prediction of Reliability of Solder Joints 

    Novotný, V. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This article deals with the sphere of solder joints reliability and narrower focus is using simulation software ANSYS and fatigue models for estimate reliabity of solder joints. The text describes the introduction to the ...
  • Comparison of Dry and Wet Oxidation Process during Low Pressure Boron Diffusion with BBR3 in Solar Cell Production 

    Mojrová, B. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This paper deals with replacing a dry oxidation with a wet oxidation process during low pressure diffusion using boron tribromide (BBr3) in solar cell production. Because the liquid boron trioxide (B2O3), a product of a ...
  • Electrochemical propertiesand thermal stability of cup-like shape gold nanostructures 

    Kynclová, H. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    Nanostructured surfaces are useful in enlargement of electroactive area of sensing electrodes. The electrodes are very sensitive with maintaining small electrode geometry. In this study, surfaces modified by cup-like gold ...
  • A New Students Development Board for Embedded Systems 

    Kuchtová, Z. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This article describes a new development board for embedded system that was designed especially for Microcontroller and microprocessors student course. Not only hardware part was created, but also compiler, IDE and JTAG ...
  • Multicopter Attitude Estimation Using Dynamic Model 

    Baránek, R. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    The paper is focused on attitude estimation of multicopters. Specifically the use of dynamic model of multicopter in the attitude estimation algorithm is investigated. The examined algorithm is compared to the standard ...
  • Chalenges of integration of smart antennas in Ad Hoc NETwork 

    Makhlouf, N. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    Due to the need for increasing exchange and share data, users demand easy connectivity and fast network wherever they are. Recently, users are interested in interconnecting all their personal electronic devices together ...
  • Real-time Crane Control via PC 

    Arm, J. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    In this paper, creation of SCADA system, which controls and monitors model of gantry crane in real time, is described. This crane will be controlled via process station communicating with PC via Modbus TCP protocol. Moreover, ...
  • Broadband Linear Antenna Array for BAN Applications 

    Gaja, T. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    The work deals with antenna array for application in BAN. The main attention is focused on the shaping of radiation pattern. The paper describes the principles of the designing antenna arrays with desired radiation patterns. ...
  • Dynamic Time Warping for Vehicle Classification 

    Halachkin, A. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This work focuses on the dynamic time warping for vehicle classification. The theoretical part includes the dynamic time warping algorithm description. The DTW module in Python, that was created during this work, is ...
  • Compensation Of Smile Effect Distortion In Electrophoretic Gel Image 

    Dvořáček, T. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This paper is engaged in the issue of automatic detection and removal of smile effect geometrical distortion in agarose gel electrophoresis images. Based on created databank of electrophoretic phantoms, an algorithm that ...
  • Acoustical detection of gunshots in the open 

    Hrabina, M., (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This paper descibes development of reliable gunshot detection system without need of localization, with emphasis on low power consumption for use in counter-poacher devices primarily protecting elephants in Africa. Intended ...
  • Digital Image Analysis of Mitotic Chromosomes 

    Buchta, M. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    The present work describes the cytogenetic from the point of view of image processing. We propose an algorithm which is able to treat every aspect of this analysis such as segmentation and separation of chromosomes. Moreover, ...
  • Design of the Simulation Model of the Programmable Amplifier LNVGA 

    Sobotka, J. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This paper presents the design of the simulation models of the programmable amplifier LNVGA (Low Noise Variable Gain Amplifier). Block view on the internal structure of the LNVGA is introduced and as an example, the principle ...
  • Optimization of Multilayer Perceptron Training Parameters Using Artificial Bee Colony and Genetic Algorithm 

    Kartci, A. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    In this paper, the momentum coefficient, learning rate, and the number of hidden neurons where the multilayer perceptron works best, are determined. The network and optimization algorithms are written in MATLAB, which was ...
  • General Floating Element Simulator Employing VDCCs and Grounded Components 

    Kartci, A. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    In this study, a new general floating element simulator circuit employing two voltage differencing current conveyors (VDCCs) and three passive components is proposed. Depending on the passive component selection the presented ...
  • Sodium ion batteries and gel electrolytes 

    Gottwald, T. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2015)
    This work deals with the elecdrode materials and gel electrolytes suitable for sodium-ion batteries (Na-ion batteries). In the field of electrode materials were investigated carbon materials based on CR5995 with added ...