X-Band PLL Synthesizer
Abstrakt
This paper deals with design and realization of a PLL synthesizer for the microwave X−band. The synthesizer is intended for use as a local oscillator in a K−band downconverter. The design goal was to achieve very low phase noise and spurious free signal with a sufficient power level. For that purpose a low phase noise MMIC VCO was used in phase locked loop. The PLL works at half the output frequency, therefore there is a frequency doubler at the output of the PLL. The output signal from the frequency doubler is filtered by a band-pass filter and finally amplified by a single stage amplifier.
Klíčová slova
Microwave PLL synthesizer, phase locked loop, low phase noise, local oscillator, X-bandTrvalý odkaz
http://hdl.handle.net/11012/57940Typ dokumentu
Recenzovaný dokumentVerze dokumentu
Finální verze PDFZdrojový dokument
Radioengineering. 2006, vol. 15, č. 1, s. 13-16. ISSN 1210-2512http://www.radioeng.cz/fulltexts/2006/06_01_13_16.pdf
Kolekce
- 2006/1 [9]