Now showing items 1-20 of 183

  • Calculation and Measurement of Thermostatic Bimetal Deflection in Molded Case Circuit Breaker 

    Zelenka, Michal (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with a thermal overload trip unit in automatically operated electrical switching devices. The first part describes an application of thermostatic bimetal in thermal overload trip unit. The main part is ...
  • Experimental Analysis of Low Voltage Arc Between Carbon Electrodes with Unknown Cores 

    Šimek, David (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The paper is focused on an electric arc spectroscopy diagnostics related to electric low voltage apparatuses. Measurement of radiation spectra of the electric arc burning between carbon electrodes with unknown cores is ...
  • Laboratory Workbench for Educational Purposes 

    Ondrejček, Vladimír (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This work deals with the development and implementation of new laboratory device for laboratory exercises in electric drives. Reasons and requirements for this workbench are evaluated. In the next section a prototype design ...
  • Quantification of Prosodic Impairment in Patients with Idiopathic Parkinson's Disease 

    Galáž, Zoltán (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with quantitative analysis of prosodic impairment in idiopathic Parkinson’s disease (PD). Experimental dataset consisted of 97 PD patients and 55 healthy speakers. The prosodic features expressing monopitch, ...
  • Segmentation of the Common Carotid Artery Intima Media Using Active Contour Models 

    Hesko, Branislav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    Ultrasound measurements of the human carotid artery intima media thickness are conventionally obtained using manual tracing between tissue layers. This article consists of different approach, when intima media thickness ...
  • Low Voltage Converter for Organic Tranducers in Energy Harvesting 

    Znbill, Laila (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The paper describes the possibilities of energy harvesting using organic semiconductors. It is shown that organic semiconductors enable a large variability and some of their properties may be better than by inorganic ...
  • Modelling of Gas Diffusion In The 3-D Structured Metal Oxide Nanofilm 

    Pytlíček, Zdeněk (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    Nanostructures of various materials and arrangements have been shown to be highly effective in the detection of chemical and biological matters. In this paper, a novel self-assembled 3-D nanofilm is described. We present ...
  • Galvanic Deposition of Gold Nanorods via AAO Template for VOCs Sensing 

    Šetka, M. (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The use of gold nanostructures for the creation of sensing devices for volatile organic compounds (VOCs) is particularly important because of their unique electronic, optical, and catalytic properties. In this paper, the ...
  • Sensitive Analysis of IR Heat Emitter for Soldering 

    Skácel, Josef; Otáhal, Alexandr (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with the possibility of simulation in ANSYS. Research is focused on the sensitive analysis of heat emitters. The first part is about basic properties of infrared heat emitter. For soldering is necessary ...
  • Organic-Inorganic Hybrid Solar Cells 

    Strachala, David; Hylský, Josef; Kadlec, Michal (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The purpose of the presented work is to find an optimal way for the preparation of the organic-inorganic hybrid solar cells based on perovskite structure CH3NH3PbI3-2Cl2 /PC61BM. The main idea of the work is to create an ...
  • Electricity Load Forecasting Using Auto-Regressive and Artificial Neural Network Model 

    Vyčítal, Václav (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    In this paper a short review of two forecasting models Autoregressive and Artificial neural network is presented. Both models were used to demonstrate its superior performance in load forecasting issues. In the third section ...
  • EEG Signal Analysis based on EMD and Discrete Energy Separation Algorithm 

    Potočňák, Tomáš (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with spectral analysis of nocturnal EEG signal from apnoea/hypopnea patients. Main goal is to employ methods independent to Fourier Transform, because of nonstationary character of signal, to better ...
  • Thermal Model of Induction Machine and its Practical Verification 

    Toman, Marek (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This article deals with making of thermal models of electric machines using so-called thermal network. The first part of this article describes reasons why thermal models of electric machine should be used. In the second ...
  • Comparative Analysis of Common and Unique Targets in Drug Resistant Strain of Borrelia Burgdorferi 

    Koščová, Pavlína (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The number of drug-resistant strains of Borrelia burgdorferi necessitated the identification of potential drug targets specific to the strain of interest. The chromosomal and plasmid genes of B. burgdorferi strain B31 were ...
  • The Eddy Current Losses of High-Speed Solid Rotor Induction Machine as Function of the Radial Air-Gap Lenght 

    Bárta, Jan (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper introduces that the appropriately selected air-gap width have major impact in terms of efficiency for high-speed induction machines. Machine of interest is high-speed solid rotor cage induction machine intended ...
  • Finite Element Analysis of High Speed Induction Motor With Axially Slitted Rotor 

    Klíma, Jiří (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with an analysis of three phase, two pole high speed induction machine with axially slitted solid rotor. The finite element model of induction motor with axial slits has been developed and motor has been ...
  • Frequency Characteristic of the Induction Machine 

    Kroupa, Martin (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    The paper focuses on the induction machine as the transfer member and on its behavior in the frequency domain. The linearized mathematical model of induction machine is introduced and the issue of its frequency transmissions ...
  • Simulation of Static Grant Allocation in NG-PON2 Networks 

    Cymorek, Patrik (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper deals with issue of static grant allocation. The main goal of this paper is to present functionality of NG-PON2 networks and describe static form of grant allocation. The first part of the paper is focused on ...
  • Warehouse Modeling Using Graphical User Interface 

    Rajnoha, Martin (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    This paper describes a new algorithm which enable efficient conversion of graphical representation of warehouse into graph theory representation and consequently accelerates estimation for route costs. The proposed algorithm ...
  • Linearly Polarized HMSIW U-slot Antenna for Off-body Communication 

    Hubka, Patrik (Vysoké učení technické v Brně, Fakulta elektrotechniky a komunikačních technologií, 2016)
    In this paper, a linearly polarized U-slot half-mode substrate integrated waveguide (HMSIW) antenna for off-body communication is presented. It is based on a combination of a U– shaped slot etched in the HMSIW top wall and ...