Transparent alumina ceramics: Effect of standard and plasma generated stabilizing approaches in colloidal processing

Loading...
Thumbnail Image
Date
2019-10-04
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Wiley
Altmetrics
Abstract
The study is focused on an optimization of the slipcasting process used for the fabrication of the transparent/translucent alumina ceramics; more precisely, on specifying the most appropriate way to stabilize the cast alumina suspensions. An innovative method of the particles’ stabilization by plasma treatment was compared with the classical electrostatic and the most frequently used electrosteric approach. Properties of green bodies (pore size distribution, density) and sintered samples (density, mean grain size, real inline transmittance) were measured in term to evaluate the impact of the individual stabilization mechanism on the final properties of the transparent/translucent ceramics. The results showed that all tested approaches enable the preparation of the transparent/translucent alumina ceramics by Hot Isostatic Pressing. Ceramics prepared from the plasma treated as well as the electrostatically stabilized powders exhibited narrower pore size distribution, higher density, and lower mean grain size in comparison to ceramics fabricated from only electrosterically stabilized powders. Despite these promising properties the plasmatreated samples resulted in an unexpectedly low RIT of 36% caused by the presence of thin cracks. However, the electrostatically stabilized samples achieved the highest RIT value of 57%.
Description
Citation
JOURNAL OF THE AMERICAN CERAMIC SOCIETY. 2019, vol. 102, issue 12, p. 7137-7144.
https://ceramics.onlinelibrary.wiley.com/doi/full/10.1111/jace.16630
Document type
Peer-reviewed
Document version
Accepted version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
Citace PRO