Capacitance Multiplier Using Small Values of Multiplication Factors for Adjustability Extension and Parasitic Resistance Cancellation Technique
Loading...
Date
2020-08-05
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
IEEE
Altmetrics
Abstract
This paper presents a new concept of a capacitance multiplier using the topology of differential voltage buffer and current conveyor, where the capacitor is connected to the current input terminal. The presented topology overcomes the typical issue known from similar solutions, i.e. creation of an undesired lossy character of the impedance plot. The added feedback path in the structure serves for minimization of the serial parasitic resistance of the current input terminal as well as the output resistance of differential voltage buffer. The electronic driving of the current and voltage internal gains of the active elements allows the adjustment of the capacitance multiplication factor as well as readjustment of the overall capacitance structure between the lossy and lossless modes of operation. The adjustment of the multiplication factor intentionally targets low ranges of gains. Despite that the multiplication factor equals or is less than 1, the range of adjustability is very wide. Simple modifications of the proposed concept leading to the differential-mode operation and enhancement of the multiplication factor are shown and explored. They were experimentally tested in more than 2 decades, from 0.03 to 5.8 nF, and controlled by single DC voltage from 0.1 to 1.0 V. The outputs of experimental measurements meet with the PSpice simulations and confirm the design validity.
Description
Citation
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en