3D Printing Temperature Tailors Electrical and Electrochemical Properties through Changing Inner Distribution of Graphite/Polymer
Loading...
Date
2021-06-01
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Wiley-VCH
Altmetrics
Abstract
The rise of 3D printing technology, with fused deposition modeling as one of the simplest and most widely used techniques, has empowered an increasing interest for composite filaments, providing additional functionality to 3D-printed components. For future applications, like electrochemical energy storage, energy conversion, and sensing, the tuning of the electrochemical properties of the filament and its characterization is of eminent importance to improve the performance of 3D-printed devices. In this work, customized conductive graphite/poly(lactic acid) filament with a percentage of graphite filler close to the conductivity percolation limit is fabricated and 3D-printed into electrochemical devices. Detailed scanning electrochemical microscopy investigations demonstrate that 3D-printing temperature has a dramatic effect on the conductivity and electrochemical performance due to a changed conducive filler/polymer distribution. This may allow, e.g., 3D printing of active/inactive parts of the same structure from the same filament when changing the 3D printing nozzle temperature. These tailored properties can have profound influence on the application of these 3D-printed composites, which can lead to a dramatically different functionality of the final electrical, electrochemical, and energy storage device.
Description
Citation
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution-NonCommercial 4.0 International
http://creativecommons.org/licenses/by-nc/4.0/
http://creativecommons.org/licenses/by-nc/4.0/