Metal-substrate-supported tungsten-oxide nanoarrays via porous-alumina-assisted anodization: from nanocolumns to nanocapsules and nanotubes

An array of highly aligned tungsten-oxide (TO) nanorods, similar to 80 nm wide, up to 900 nm long, spatially separated at their bottoms by tungsten metal on a substrate is synthesized via the self-localized anodization of aluminum followed by the porous-alumina-assisted re-anodization of tungsten in a sputter-deposited Al/W bilayer. Moreover, the pore-directed TO nanocapsules may grow, which can be electrochemically top-opened in alumina nanopores and transformed to TO nanotubes, representing unique architectures built up on tungsten substrates to date. The as-grown nanorods are composed of amorphous WO3 mixed with minor amounts of WO2 and Al2O3 in the outer layer and oxide-hydroxide compound (WO(3 center dot)nH(2)O) with aluminum tungstate (2Al(2)O(3)center dot 5WO(3)), mainly present inside the rods. Once the growing oxide fills up the pores, it comes out as an array of exotic protuberances of highly hydrated TO, with no analogues among the other valve-metal oxides. Vacuum or air annealing at 550 degrees C increases the portion of non-stoichiometric oxides 'doped' with OH-groups and gives monoclinic WO2.9 or a mixture of WO3 and WO2.9 nanocrystalline phases, respectively. The nanorods show n-type semiconductor behavior when examined by Mott-Schottky analysis, with a high carrier density of 7 x 10(19) or 3 x 10(19) cm(-3) for the air- or vacuum-annealed samples, associated with a charge depletion layer of about 8 or 10 nm, respectively. A model for the growth of the metal-substrate-separated TO nanocapsules and tubes is proposed and experimentally justified. The findings suggest that the new TO nanoarrays with well-defined nano-channels for carriers may form the basic elements for photoanodes or emerging 3-D micro- and nano-sensors.
Řady vysoce uspořádaných nanodrátků oxidů wolframu (TO), s šířkou 80 nm a délkou 900 nm, oddělené na na jejich spodní části od substrátu pomocí wolframu byli připraveny pomocí anodizace hliníků do podoby porézní aluminy a následně pokračující anodizací wolframu přes tuto aluminu z využitím dvojvrstvy Al/W. Jsou uvedeny postupy přípravy několika druhů nanostruktur z oxidů wolframu včetně struktur s nanopry. Kromě toho můžou být v pórech připraveny i nanokapsle a nanotrubice, představující unikátní stavební jednotky založených na wolframu. Výzkum naznačuje, že nová nanopole s nano kanálky můžou být využita jak ve fotovoltaice, tak i při výrobě nových 3-D mikro - a nano senzorů.

Keywords

tungsten-oxide, anodization, porous-alumina, nanocolumns, nanocapsules, nanotubes

Citation

Journal of Materials Chemistry A. 2016, vol. 21, issue 4, p. 8219-8232.
http://pubs.rsc.org/en/content/articlelanding/2016/ta/c6ta02027e#!divAbstract

Document type

Peer-reviewed

Document version

Published version

Language of document

en