Improving Rotary Draw Bending Process by Changing a Geometry of the Pressure Die
Loading...
Date
2021-10-01
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Jan Evangelista Purkyne University in Usti nad Labem
Altmetrics
Abstract
The paper is focused on an analysis and optimization of the rotary draw bending process to eliminate bent tube ovality by modification of the pressure die geometry. The bending process is realized on Wafios CNC bending machine. A tube that is bent for an automotive application is made of 34MnB5 steel. Currently, after tube bending process by an angle of 120°, an unacceptable ovality occurs. Therefore, it is necessary to improve the quality of production and thus prevent the formation of unacceptable ovality. In this case, the optimization of the pressure die geometry is carried out. For this reason, a numerical simulation using finite element method in ANSYS software is performed. Before the actual optimization, an accuracy of the simulation is verified by analysing of the current state and comparing it with simulation results.
Description
Citation
Manufacturing TECHNOLOGY. 2021, vol. 21, issue 5, p. 668-681.
https://journalmt.com/artkey/mft-202105-0016_improving-rotary-draw-bending-process-by-changing-a-geometry-of-the-pressure-bar.php
https://journalmt.com/artkey/mft-202105-0016_improving-rotary-draw-bending-process-by-changing-a-geometry-of-the-pressure-bar.php
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution-NonCommercial 4.0 International
http://creativecommons.org/licenses/by-nc/4.0/
http://creativecommons.org/licenses/by-nc/4.0/