Syntéza keramických práškových materiálů v přítomnosti ultrazvukového pole

Loading...
Thumbnail Image
Date
ORCID
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Práce se zabývá syntézou oxidu ceričitého, oxidu samaritého a oxidu ceričitého dopovaného oxidem samaritým. Teoretická část je zaměřena na charakteristiku, aplikace a možnosti syntéz oxidu ceričitého. Experimentální část popisuje precipitační syntézu prášků oxidu ceričitého. Syntézy prášků probíhaly za normálních podmínek nebo v přítomnosti ultrazvukového pole. K popisu struktur připravených prášků byla využita rentgenová difrakce (XRD) a rastrovací elektronová mikroskopie (SEM). Z vybraných prášků byla připravena keramika, u které byla struktura popsána pomocí SEM, hustota určena Archimédovou metodou a velikost zrna průsečíkovou metodou. Precipitační syntézou byly připraveny čisté prášky oxidu ceričitého, oxidu samaritého a oxidu ceričitého dopovaného oxidem samaritým. Morfologie prášku byla silně ovlivněna pH a dobou stárnutí. Ultrazvuk urychloval dobu stárnutí. Při pH > 11 vznikaly částice tyčinkovitého tvaru. Doba stárnutí a ultrazvuk podporovaly vznik tyčinek. Z prášku s tyčinkovitou morfologií byly připraveny keramiky s hustotou až 97,14% teoretické hustoty.
The thesis concerns the synthesis Ceric Oxide, Samarium Oxide and Samarium doped Cerium Oxide. The theoretical part is focused on the characteristics, applications and possibilities of the Cerium Oxide synthesis. The experimental part describes the precipitation of the Cerium Oxide powder. The synthesis of the powders were proceeded in the normal conditions or in the presence of ultrasonic field. For the purposes of description of the ready powders the x-ray diffraction (XRD) and the raster electron microscopy (SEM) were used. The ceramics were made of the selected powders where the structure was described by SEM, the density by Archimedes´Method and the grain size by grid-line intersect method. Using the precipitation synthesis, the pure powders of Ceric Oxide, Samarium Oxide and Samarium doped Cerium Oxide were prepared. The powder morphology was strongly involved by the pH level and by ageing time. The ultrasound was accelerating the ageing. At the values of pH > 11 the rodlike particles were created. The ageing time and the ultrasound supported the creation of the rodlike particles. The ceramics made of the powder with the presence of the rodlike morphology showed the density up to 97,14% of the theoretical density.
Description
Citation
KOČICOVÁ, P. Syntéza keramických práškových materiálů v přítomnosti ultrazvukového pole [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2011.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Materiálové inženýrství
Comittee
doc. Ing. Bohumil Pacal, CSc. (předseda) doc. Ing. Libor Pantělejev, Ph.D. (místopředseda) prof. Ing. Stanislav Věchet, CSc. (člen) prof. RNDr. Jan Kohout, CSc. (člen) Ing. Zdeněk Chlup, Ph.D. (člen)
Date of acceptance
2011-06-13
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení
DOI
Collections
Citace PRO