Simple Models of EMI Filters for Low Frequency Range

Loading...
Thumbnail Image
Date
2008-09
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Společnost pro radioelektronické inženýrství
Abstract
This paper deals with mathematical simulations of EMI filters’ performance. These filters are commonly used for the suppressing of electromagnetic interference which penetrates through the power supply networks. The performance of these filters depends on terminating impedances which are plugged to the inputs and outputs clamps of the EMI filters. This paper describes the method by which it is possible to calculate the insertion loss of the filters. The method is based on the modified nodal voltage method. The circuitry of the EMI filters is used for their description. The effect of spurious components is not taken into account. The filter itself is described by set of admittance parameters, which makes the presented method more universal. The calculated results were compared with measured data of several filters for several impedance combinations. Different test setups, like asymmetrical, symmetrical, etc. were taken into account. The simplicity and accuracy of the presented method is discussed in the conclusion. The achieved accuracy is on high level. The described method is universal, but for filters with more than one current compensated inductor, the mentioned method is complicated. The size of the final equation for calculating the insertion loss rapidly increases with the number of current compensated inductors.
Description
Citation
Radioengineering. 2008, vol. 17, č. 3, s. 8-14. ISSN 1210-2512
http://www.radioeng.cz/fulltexts/2008/08_03_008_014.pdf
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution 3.0 Unported License
http://creativecommons.org/licenses/by/3.0/
DOI
Collections
Citace PRO