Servoelektrická upínací jednotka

Loading...
Thumbnail Image
Date
ORCID
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Obsahom diplomovej práce je navrhnutie konštrukcie upínacej jednotky s mechanickým multiplikátorom. Jednotka bude slúžiť k technologickému upínaniu dielcov v technickom zariadení. Mojou úlohou bolo zvoliť spôsob konštrukcie a navrhnúť hlavnú pohonovú jednotku pre upínaciu čežusť. Vybral som riešenie s mechanickým multiplikátorom. Rám jednotky je zostavený z pevnej a pohyblivej upínacej čežusti a je samonosný. Jednotka je riešená ako vstavaný modul. Celá konštrukcia musela byť navrhnutá tak, aby splnila počiatočné parametre uvedené v zadaní práce. Medzi hlavné parametre patrí spínacia sila 80kN, potom rozsah pracovného zdvihu 15 mm a vežkosť prestavenia, čo je 250 mm. Taktiež sú v zadaní uvedené rozmerové obmedzenia: dĺžka, šírka, výška a pripojovacie rozmery jednotky.
The aim of this thesis is to design a clamping unit with mechanical multiplier. Unit will serve as a technological clamping element in the technical equipment. My task was to select the method of construction and design driving main unit for grip jaw. I chose a solution with a mechanical multiplier. The frame unit is made up of fixed and sliding clamping jaw and is self. Unit is designed as a built module. The entire structure must be designed to meet the initial parameters specified in the award of thesis. The main parameters include clamping strength of 80kN, the extent of working stroke 15 mm and the size of a scroll, which is 250 mm. They are also listed in the award size constraints: the length, width, height dimensions and the coupling unit.
Description
Citation
ŠTEFÁNEK, T. Servoelektrická upínací jednotka [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2009.
Document type
Document version
Date of access to the full text
Language of document
sk
Study field
Výrobní stroje, systémy a roboty
Comittee
doc. Ing. Jiří Němejc, CSc. (předseda) doc. Ing. Lubomír Vašek, CSc. (místopředseda) doc. Ing. Petr Blecha, Ph.D. (člen) doc. Ing. Vladislav Singule, CSc. (člen) Ing. Radek Král, Ph.D. (člen) doc. Ing. Radek Knoflíček, Dr. (člen) prof. Ing. Zdeněk Kolíbal, CSc. (člen)
Date of acceptance
2009-06-15
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení
DOI
Collections
Citace PRO