Nonlinear Elastic Wave Spectroscopy with MLS Perturbation Signal

Loading...
Thumbnail Image
Date
2016-05-31
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Výzkumný ústav stavebních hmot,a.s.
Altmetrics
Abstract
The article describes a test procedure based on the fundamental principle of Nonlinear Elastic Wave Spectroscopy. Without integration of all test stages into one automated measurement station and without Maximum Length Sequence(MLS) perturbation signal, this method would be otherwise lengthy and unfit for practical application. Material nonlinearities are elegantly quantified in a single coefficient. Furthermore, in the same measurement Eigenfrequency of the sample can be estimated with greater accuracy than in conventional methods. The method is applied on thermally loaded mortar samples.
Článek popisuje zkušební postup založený na principu nelineární elastické spektroskopie. Bez integrace všech fází zkoušky do jedné automatizovaného měření stanice a bez Sekvence maximální délky (MLS) by tato metoda byla zdlouhavé a nevhodná pro praktické využití. Materiálové nelinearity jsou elegantně kvantifikovány v jediném koeficientu. Kromě toho ve stejném měření je zjištěna vlastní frekvence vzorku s větší přesností než u konvenčních metod. Tato metoda se aplikuje na tepelně namáhané maltové vzorky.
Description
Citation
Procedia Engineering. 2016, vol. 151, p. 1-7.
http://www.sciencedirect.com/science/article/pii/S1877705816317532
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
Citace PRO