Effect of steel fibres dosage in alkali-activated slag mortars on acoustic emission obtained during three-point bending tests
Loading...
Date
2017-05-24
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
EDP Sciences – Web of Conferences
Altmetrics
Abstract
The acoustic emission phenomenon is directly associated with nucleation of cracks in structural materials during loading. This paper analyses acoustic emission signals captured during three-point bending fracture tests of alkali-activated slag mortar specimens with different amount of steel fibres. Typical parameters of acoustic emission signals were identified for different mixtures to further describe the under-the stress behaviour and failure development. The acoustic emission signals from crack growth were continuously monitored using acoustic emission sensors mounted on the specimen surface. Acoustic emission results are accompanied by selected mechanical fracture parameters determined via evaluation of load versus displacement diagrams recorded during threepoint bending tests
Description
Citation
MATEC Web of Conferences. 2017, vol. 107, p. 1-5.
https://www.matec-conferences.org/articles/matecconf/abs/2017/21/matecconf_dyn2017_00034/matecconf_dyn2017_00034.html
https://www.matec-conferences.org/articles/matecconf/abs/2017/21/matecconf_dyn2017_00034/matecconf_dyn2017_00034.html
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en