Hardware-in-the-loop simulace s využitítim xPC target toolboxu
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Táto práca pojednáva o použití xPC Target toolboxu v spolupráci s meracou kartou od National Instruments PCI-6259, na testovanie diagnostických embedded zariadení metódou hardware-in-the-loop. V úvode práce sa pojednáva o význame použitia tejto metódy vo vývojovom cykle, založenom na modeli (Model Based Design). Pre demonštráciu bude zostavená a otestovaná konkrétna metóda, ktorá sa následne použije pre test reálnej riadiacej jednotky. Pomocou toolboxu xPC target sa získajú dáta zo simulácie a výsledky sa porovnajú s údajmi uvedenými v dokumentácii k vstrekovaciemu systému Bosch Mono-motronic.
The submitted thesis „Hardware-in-the-loop simulation with using xPC Target toolbox“ deals with the using of xPC Target toolbox in conjunction with data acquisition card from National Instruments PCI-6259 for testing diagnostic embedded devices, using hardware-in-the-loop method. In the first part of the thesis, the importance of application of the method to the model based design is discussed. As a demonstration, the specific method is framed, tried out and used for testing the real ECU. The data from the simulation are gathered using the xPC Target, the results are subsequently compared to the data from the documentation of the fuel injection system Bosch Mono-motronic. This whole process is described in the second part of the thesis.
The submitted thesis „Hardware-in-the-loop simulation with using xPC Target toolbox“ deals with the using of xPC Target toolbox in conjunction with data acquisition card from National Instruments PCI-6259 for testing diagnostic embedded devices, using hardware-in-the-loop method. In the first part of the thesis, the importance of application of the method to the model based design is discussed. As a demonstration, the specific method is framed, tried out and used for testing the real ECU. The data from the simulation are gathered using the xPC Target, the results are subsequently compared to the data from the documentation of the fuel injection system Bosch Mono-motronic. This whole process is described in the second part of the thesis.
Description
Keywords
Hardware In The Loop, HIL, xPC Target, NI PCI-6259, hardvérový simulátor, model based design, riadiaca jednotka, systém vstrekovania paliva Bosch Mono-Motronic, Hardware In The Loop, HIL, xPC Target, NI PCI-6259, hardware simulator, model based design, electronic control unit, Bosch Mono-Motronic fuel injection system
Citation
BENKO, B. Hardware-in-the-loop simulace s využitítim xPC target toolboxu [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2011.
Document type
Document version
Date of access to the full text
Language of document
sk
Study field
Automatizační a měřicí technika
Comittee
plk. gšt. prof. Dr. Ing. Alexandr Štefek, Dr. (předseda)
prof. Ing. Petr Vavřín, DrSc. (místopředseda)
Ing. Stanislav Klusáček, Ph.D. (člen)
Ing. Pavel Kučera, Ph.D. (člen)
Ing. Radek Štohl, Ph.D. (člen)
Date of acceptance
2011-06-14
Defence
Student obhájil bakalářskou práci.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení