Experimental investigation of the check valve behaviour when the flow is reversing

Loading...
Thumbnail Image
Date
2017-05-12
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
EDP Sciences
Altmetrics
Abstract
Check valve in a pipeline is supposed to prevent the reverse flow and to allow the flow in the positive direction. The construction of check valves follows these requirements, but the check valve must not cause pressure pulsations in transients. It means when the fluid is accelerating or decelerating. The article describes an experimental investigation of a swing check valve when the flow is changing its direction. The check valve was placed in an experimental circuit, where the pressure on the upstream and downstream side of the valve was measured and the current value of flow rate was determined. The goal was to simulate conditions in the real system, where the check valve slam had been observed.
Zpětná armatura v potrubí má zamezit zpětnému proudění a umožnit proudění v pozitivním směru. Konstrukce zpětných armatur se snaží umožnit tyto požadavky, ale nesmí způsobit tlakové pulzace během přechodových dějů. To znamená během zrychlování nebo zpomalování proudu. Článek popisuje experimentální výzkum závěsné zpětné klapky, když dochází obrácení proudění. Zpětná klapka byla umístěna v experimentálním okruhu, kde tlak na obou stranách klapky byl měřen a hodnota průtoku z nich byla dopočítána. Cílem bylo nasimulovat podmínky v reálném systému, kde práskání zpětné klapky bylo pozorováno.
Description
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution 4.0 International
http://creativecommons.org/licenses/by/4.0/
Citace PRO