Transmission error analysis for heavy-duty gearbox
Loading...
Date
2018-05-22
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
JVE Intenational
Altmetrics
Abstract
This paper deals with an analysis of the transmission error. For this purpose, the measuring loop was assembled from two gear boxes. Subsequently, angles, torque and shaft speed were set or measured. For the evaluation a calculation method was used and the impact of the different transmitted torque was evaluated. The measuring loop enables to test at different operation conditions of torque and shaft rotation direction. In this paper, the static transmission error analysis for braking mode at 50 rpm shaft speed and torque range from 600 to 2400 Nm is described.
Description
Citation
Vibroengineering Procedia. 2018, vol. 18, issue 1, p. 113-116.
https://www.jvejournals.com/article/19919/
https://www.jvejournals.com/article/19919/
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en