Aerodynamická analýza a optimalizace konfigurace letounu ARES
but.committee | prof. Ing. Antonín Píštěk, CSc. (předseda) doc. Ing. Jaroslav Juračka, Ph.D. (místopředseda) doc. Ing. Vladimír Daněk, CSc. (člen) doc. Ing. Luboš Janko, CSc. (člen) doc. Ing. Ivo Jebáček, Ph.D. (člen) doc. Ing. Josef Klement, CSc. (člen) Ing. Václav Zajíc (člen) | cs |
but.defence | cs | |
but.jazyk | čeština (Czech) | |
but.program | Strojní inženýrství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Popela, Robert | cs |
dc.contributor.author | Foltýn, Pavel | cs |
dc.contributor.referee | Navrátil, Jan | cs |
dc.date.accessioned | 2019-11-27T20:23:51Z | |
dc.date.available | 2019-11-27T20:23:51Z | |
dc.date.created | 2015 | cs |
dc.description.abstract | Tato diplomová práce se zabývá aerodynamickou analýzou a tvarovými úpravami letounu ARES. Analýza je zaměřena na vyhodnocení součinitele vztlaku, odporu a klopivého momentu a dále na identifikaci míst s odtrháváním proudu, která se vyznačují vysokým odporem. Před samotnou analýzou je provedena kalibrace CFD řešiče na modelu, u něhož bylo provedeno tunelové měření. Cílem kalibrace je ověření přesnosti a věrohodnosti použité metodiky síťování a vypočítaných hodnot. Vypočítané hodnoty jsou porovnány s naměřenými daty. Tvarové úpravy letounu jsou zaměřeny na koncepční návrh sání a chlazení chladičů a motoru letounu. S upraveným modelem je provedena aerodynamická analýza s cílem zjistit odchylky součinitele vztlaku, odporu a klopivého momentu oproti původní konfiguraci. | cs |
dc.description.abstract | This thesis deals with the aerodynamic analysis and shape modifications of the ARES aircraft. The analysis focuses on the evaluation lift, drag, and pitching moment coefficient, and further to identify the locations of stripping stream which is characterized by high drag. Before the analysis calibration of the CFD solver is done with the model, which has been measured in the wind tunnel. The aim of calibration is to verify the accuracy and veracity of the methodology used in mesh creation and calculated values. Calculated values are compared with measured data. The shape modifications of the aircraft are focused on conceptual design of the suction inlets for cooling radiators and engine aircraft. Aerodynamic analysis is performed with the modified model in order to determine the variation of lift, drag and pitching moment coefficient from its original configuration. | en |
dc.description.mark | B | cs |
dc.identifier.citation | FOLTÝN, P. Aerodynamická analýza a optimalizace konfigurace letounu ARES [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2015. | cs |
dc.identifier.other | 83892 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/40094 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | Aerodynamická analýza | cs |
dc.subject | CFD | cs |
dc.subject | Fluent | cs |
dc.subject | ICEM | cs |
dc.subject | kalibrace CFD řešiče | cs |
dc.subject | sání do motoru | cs |
dc.subject | síť. | cs |
dc.subject | Aerodynamic analysis | en |
dc.subject | CFD | en |
dc.subject | Fluent | en |
dc.subject | ICEM | en |
dc.subject | calibration of the CFD solver | en |
dc.subject | suction inlets | en |
dc.subject | mesh. | en |
dc.title | Aerodynamická analýza a optimalizace konfigurace letounu ARES | cs |
dc.title.alternative | Aerodynamic analysis and shape optimization of ARES aircraft | en |
dc.type | Text | cs |
dc.type.driver | masterThesis | en |
dc.type.evskp | diplomová práce | cs |
dcterms.dateAccepted | 2015-06-15 | cs |
dcterms.modified | 2015-06-22-11:59:07 | cs |
eprints.affiliatedInstitution.faculty | Fakulta strojního inženýrství | cs |
sync.item.dbid | 83892 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2021.11.12 19:20:16 | en |
sync.item.modts | 2021.11.12 18:34:34 | en |
thesis.discipline | Stavba letadel | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta strojního inženýrství. Letecký ústav | cs |
thesis.level | Inženýrský | cs |
thesis.name | Ing. | cs |